All-Test Pro - Model 7 Professional -Deenergized Motor Circuit Analysis (Mca) Testing Instrument
The ALL-TEST PRO 7™ Professional (AT7 Pro) empowers technicians to efficiently and accurately evaluate motors in the field or on the shop floor.
- Handheld & Lightweight (under 1lb)
- On-screen step-by-step testing instructions
- Tests take less than 3 minutes
- Tests can be performed from over 1000′ away
- Detects faults at the earliest stages before motor failure
- A timing tone that supports proper rotation speed during deenergized dynamic test
- Remote Firmware Updates
- Route based testing and trending
Test any motor’s resistance, stator, rotor, contamination and insulation stats all on one device and receive accurate diagnostics within as little as a few minutes.
In addition to the core functionalities of the ALL-TEST PRO 7™, the ALL-TEST PRO 7™ PROFESSIONAL has additional functionalities that test DC motor types, traction motors and transformers, and utilizes route based testing for data trending and analysis.
Use the ALL-TEST Pro 7™ Professional for:
- Single Phase AC Induction (<1kV) manual test
- Single Phase AC Induction (<1kV) auto-test
- 3 Phase AC Induction-Squirrel cage rotor (<1kV) manual test
- 3 Phase AC Induction-Squirrel cage rotor (<1kV) auto-test
- AC Induction-Squirrel cage rotor (>1kV)
- AC Induction wound rotor (<1kV) manual test **
- AC Induction wound rotor (<1kV) auto-test
- AC Induction wound rotor (>1kV)
- AC Synchronous (<1kV) manual test **
- AC Synchronous (<1kV) auto-test
- AC Synchronous (>1kV)
- Generators
- DC Motors (Unavailable on ATP7 basic model)
- Traction Motors (Unavailable on ATP7 basic model)
- Transformers (Unavailable on ATP7 basic model)
Complete Motor Health Assessment
The electrical health of all motor components is evaluated, including, but not limited to induction windings, rotors, DC field windings and armature, field and rotor coils in synchronous motors, primary and secondary windings in transformers, and all associated connections and cables.
Patented Test Value Static™ (TVS™)
Test Value Static (TVS) is a sum calculated from the 3-phase MCA static test and is used as a reference value for the motor. Common types of faults in the rotor and stator windings will change TVS.
Patented Dynamic Stator and Rotor Signatures™
Used to evaluate the condition of the stator and squirrel-cage rotor in a single test. Perfect for testing new and repaired motors prior to acceptance.