EPS - Model EL 9000B HP 2U -600-2400 W - Electronic Load System
From E-Load
The electronic high performance loads »EPS/EL 9000B HP 2U« of EPS Electronic Power Supplies are especially suitable for test systems and industrial controls due to their compact construction of a 19” enclosure with 2 height units (2U). The result is a space saving of 33%. The DC input range features new voltages up to 750V, currents up to 170A at power ratings with 2400W. Apart from basic functions of electronic loads, set point curves can be produced in the integrated function generator (sine, rectangular, triangular and other curve types). Arbitrary curves can even be stored on and uploaded from a USB flash drive.
-
Most popular related searches
Products Details
In the battery test mode, a battery can be discharged with a constant current, - power or - resistance until the battery voltage reaches an adjustable final discharge voltage. If this threshold is exceeded, the load input is automatically switched off (deep discharge protection). The discharge time and consumed charge (Ah) are measured and displayed.
For remote control using a PC or PLC the devices are provided as standard with a USB-B slot on the rear side as well as a galvanically isolated fast analog interface.
Via optional plug-in interface modules other digital interfaces such as Ethernet/CAT, Profibus/Net, ModBus TCP, CANopen, CAN and more can be added. These enable the devices to be connected to standard industrial buses simply by changing or adding a small module. The configuration, if at all necessary, is simple. Thus the loads may, for example, be operated with other loads or even other types of equipment or controlled by a PC or PLC, all using the digital interfaces.
In addition the devices offer the possibility to connect to compatible power supplies via a Shared Bus, in order to create a so-called two-quadrants system. This operation mode uses the source-sink principle for testing devices, components and other parts in many industrial areas. A genuine master-slave connection with totalling of the slave units is also provided as standard. Operating in this way allows up to 10 units to be combined to a single system with a total power of up to 24 kW at 1700 A.
All models have a FPGA/DSP based digital control. These enable an exact and fast measurement and display of actual values.
As an option are preconfigured cabinet systems possible, too.
Energy Efficiency: Temperature regulated fans
Scope of delivery:
- El. Load
- Operation Manual
- AC mains cord
- Share-Bus plug
- Remote sense plug
- USB-cable 1.8m
- Set DC-terminal cover(s)
- USB stick 'Drivers&Tools incl. Software'
Technical Data
- Order code: 113721
- Input Power: 1000W@40°C
- Design 19 inch
Customer reviews
No reviews were found for EPS - Model EL 9000B HP 2U -600-2400 W - Electronic Load System. Be the first to review!