Fastach - Model 10 - Asphalt Paving Screeds
Terex screeds offer contractors unequaled performance for high-quality mats mile after mile. Terex screeds meet any contractor's needs including fixed-width or extendable, front-mounted or rear-mounted hydraulic extensions, and fuel-fired or electric heat. Fastach diesel screeds offer operators a fixed-width design with quick-attach extensions to accommodate full-width paving.
-
Most popular related searches
Adjustable Paving Width Fast and Easy
You Designed Fastach
Contractors have won numerous mat smoothness awards using Terex | Cedarapids paving equipment. Customers deserve the credit because our design engineers get some of their best ideas from a very reliable source: owners and operators like you. You have the experience of laying literally thousands of miles of hot mix on a variety of surfaces. So you’re in the best position to tell us what you want in a screed. And we listen.
The result is the Terex | Cedarapids Fastach 8 and 10 screeds. The name “Fastach” comes from your requirement that screed extensions could be attached fast. So we built it to accept extensions in easy-to-attach sections of various sizes. And as long as we were at it, we designed the Fastach to solve many more of your screed problems.
Extended Life Expectancy
The Fastach screeds are two-fisted tough. The screed bottoms are a full 1/2 inch (12.7 mm) thick. And since they are 34 inches (867 mm) wide, the pounds-per-square-inch load is spread out, giving the screed faster responsiveness and lots more wear time before replacement. When changing screed bottoms, you have easy access to all mounting bolts.
Versatile Vibrator Control
Hydraulic vibrators put out 3,000 vpm to make the mat as smooth as it can be. Eccentric weights allow increasing or decreasing amplitude so you can fine tune the machine to match your asphalt mix design. Spring-loaded guards facilitate adjustment of the eccentric weights. And while you’re working, you get a clear view from the 16 inch (406 mm) wide walkway that comes as standard equipment. For close quarter paving, the walkways flip up out of the way.
Extend Flexibility
Even though the Fastach screeds give you 8 feet (2438 mm) and 10 feet (3048 mm) paving widths as standard, chances are you’ll need it to vary by inches or feet. That’s why we offer Fastach extensions in 6 inch, 1 foot, 2 foot, 2 foot slopeable, 3 foot and 5 foot widths (152 mm, 305 mm, 610 mm, 914 mm and 1524 mm), all with swing-up auger guards.
The extensions are easily pin-lock attached to the main Fastach frame. Hydraulic vibration is standard on all widths except the 6 inch (152 mm) and 2 foot (610 mm) slopeable extensions. The 3 foot (914 mm) and 5 foot (1524 mm) Fastach sections include a self-contained 89,000 btu oil burner as standard equipment. The 2 foot (610 mm) extension is available with or without an oil burner.
Turn Up The Heat On Paving Profits
Two burners are mounted on the Fastach screeds. Combined, they generate a 178,000 btu “heat wave” which quickly brings the screed up to working temperature during pre-start checks. No tools are necessary to disassemble the burners, so the high cost of maintenance downtime is cut to the bone. And that’s more profit you can transfer to the bottom line.
Expand Your Strike-Off Options
Optional hydraulic strike-offs extend at the touch of a button to give you a 14 foot (4267 mm) paving width with the Fastach 8 and an 18 foot (5486 mm) paving width with the Fastach 10. Right and left hand strike-offs are remote control operated and will hydraulically slope positively.
The strike-offs are mounted so they crown with the screed. Power crown control is a standard feature. Simultaneous crown is achieved through a chain and sprocket system with 3 inch (76 mm) positive and 1 inch (25.4 mm) negative crown. Individual front and rear crown setting is also possible. Strike-off match height with main screed is an easy manual adjustment.
Put Your Fingers On Performance
Two hand-held remote control units with vandal covers are standard equipment on the Fastach screeds. The remote controls allow freedom to move around the screed and monitor the paving process. Functions at your fingertips include auger override/stop, strike-offs in/out, slope up/down, power pull-point control and automatics auto/set-up/man.
Feed controls are conveniently located on both the left and right sides of the screed. Power crown, burner, horn controls, vibratory frequency adjustment and optional slope controller are easily accessible on panels at the center of the screed.
Specification
Screed Extensions
Fastach pin-lock extensions in 6 in (152 mm), 1 ft (305 mm), 2 ft (610 mm), 2 ft (610 mm) slopeable, 3 ft (914 mm) and 5 ft (1524 mm) widths
Vibrators
Single hydraulic motors provide up to 3,000 vpm
Adjustable-position eccentric weights to increase or decrease amplitude
Vibration standard on all extensions except the 6 in (152 mm) and 2 ft (610 mm) slopeable
Screed Heating System
Two fuel oil burners with 178,000 btu total output
Self-contained 89,000 btu burner on the 3 ft (914 mm) and 5 ft (1524 mm) Fastach extensions
2 ft (610 mm) extension available with or without oil burner
Screed Crown
Power crown control standard
Chain and sprocket with 3 in (76 mm) positive and 1 in (25.4 mm) negative crown
Strike-offs and Screeding Bottoms (Optional)
Fastach 8
Extend to 3 ft (914 mm) each side
Strike-offs hydraulically slope 5 inches (127 mm) positively in 3 ft (914 mm)
Approximate weight 3500 lbs (1588 kg)
Fastach 10
Extend to 4 ft (1219 mm) each side
Strike-offs hydraulically slope 7 inches (178 mm) positively in 4 ft (1219 mm)
Approximate weight 4300 lbs (1951 kg)
Controls
Two hand-held remote control units with vandal covers, functions include auger override/stop, strike-offs in/out, slope up/down, power-pull point control and automatics auto/setup/man Feed control panels located at left and right side of screed Power crown, burner, horn, vibratory frequency adjustment and optional slope controller located on panels at center of screed
Quality Starts With Fundamentals
Manufacturing Pride
From the top level of Terex Roadbuilding management through every department involved in the design, production and service of your Terex | Cedarapids Fastach screed, pride in a job well done is our fundamental philosophy. This assures quality. We strive for the same pride you feel in the completion of a top-notch road project. Our personal system of accountability works in your best interest. We stand behind our products.
Large Inventory of Terex | Cedarapids Parts
When replacement parts are needed, purchase genuine Terex | Cedarapids parts. Our parts are identical to the originals. Your Terex Roadbuilding distributor has them in stock or can get them fast. Factory-trained personnel are as close as your telephone. We have distributor outlets worldwide ready to serve you now.
We’re Proud of Our Service
Your local Terex Roadbuilding distributor offers service professionals to handle all your paver repair needs. Many of these individuals have attended Terex | Cedarapids paver service schools for added in-depth training. If repairs can’t be done at the distributor, Terex Roadbuilding offers at-factory repair services. In either case, the scope of necessary repairs are determined and discussed with the customer prior to any work being done. All final repairs are done to customers specifications. Our Paver Repair Specialists make all the difference in your post-purchase satisfaction. So look to your local Terex Roadbuilding distributor for service you can trust.
Features
- Available in 8 ft (22.4 m) and 10 ft (3.0 m) models
- Hardened alloy screed plates manufactured to tight flatness specifications for smoother mats
- Heavy-duty rigid frames for wide-width paving
- Independent angle-of-attack adjustment for hydraulic extensions
- Multi-function, hand-held remote control
- 3000 vpm hydraulic vibrators
- Electric-over-hydraulic for simple, accurate operation
- Extensions in 6 in, 12 in, 24 in, 24 in slopeable, 36 in and 60 in (152, 305, 610, 914 and 1524 mm) widths
- Optional hydraulic strike-offs/bottoms slope + 7 in in 4ft (+178 mm in 1.2 m)
Customer reviews
No reviews were found for Fastach - Model 10 - Asphalt Paving Screeds. Be the first to review!