BioBANG - Model In Recirculation - for Biogas & Biomethane Plants
Saves more than 20% of the supply
Improves the mix by more than 50%
Uses 100% of difficult, low-cost biomass
It increases the yield
BioBANG reduces the amount of liquid in favor of the solid.
Improves the mix
BioBANG progressively reduces the operation of the agitators in the plant.
BioBANG gradually reduces the fiber and uses waste products and/or low-cost food for the plant.
Greater adaptability to the customer’s feeding
Increases the fibers digestibility use them for your diet change or repowering projects from biogas to biomethane.
Resizing of the agitators with relative cost optimization
Reduces the product viscosity rinside the digester and optimize the size of stirrers and pumping systems.
Optimization of digester volumes and reduction of the cost of the plant
Reduce the biomass retention time even the waste ones and bring greater safety in the design phase.
Biomass pretreatment in biogas and biomethane plants can be splitted into 2 phases:
Pretreatment on the feeding line: it coarsely chops the solid biomass and mixes it with the liquid to facilitate physical loading into the digesters.
Process pretreatment: It intercepts in the digesters the biomass fraction that resists the first digestion stages and tends to float on surface. This is a “fine” disgregation and homogenization process that allows to maximize plant’s hydraulic efficiency and yield.
BioBANG® technology, works in recirculation as a pre-treatment process. The suction phase is installed in the digester upper part where there is 10-20% of difficult biomass that, stratifying on the surface reduces the plant yield. In one step, it’s recirculated to the bottom of the digester, ready to be immediately involved in the digestion process like the rest of the feed, without competing with bacteria.
BioBANG® in recirculation maximizes the yield and hydraulic management of the plant, optimizing its energy efficiency. In fact, the energy of the treatment is totally recovered by reducing the mixing and pumping energy consumption. Viscosity control becomes the strong point for an efficiency and yield that cannot be compared to a plant without BioBANG®.
- Owners of agricultural, industrial Manufacturers OFMSW biogas or biomethane plants.
- Manufacturers of agricultural, industrial or OFMSW biogas or biomethane plants.
- Companies that repower agricultural, industrial or OFMSW biogas or biomethane plants.
How does the test work?
The test takes 60 minutes.
Our mobile unit will come to your plant in the most suitable date to you, get a sample from your biomass, submit it to BioBANG® process and leave the treated material at your site.
How to achieve efficiency on your system with BioBANG in three steps
- One-hour test with our mobile unit;
- Try without obligation at a subsidized cost for three months;
- At the end of the three-month trial period you can decide whether to continue earning by purchasing your BioBANG® or return it to us.
To ensure the best performance, BioBANG works closely with all leading biomass research and development centres, where internationally renowned biologists work with BioBANG’s Research and Development department.
Continuous technical developments, scientific research and comparison make it possible for us to make the most of our patented technology so you can achieve results that are unrivalled in the global market.
BioBANG is leader of biomasses treatment and pretreatment for biogas and biomethane plants.