Galaxy - Inroof System
From Inroof System
A new design for roof construction became reality. Using the Galaxy rafter system together with the Galaxy water tight modules, a leak proof solar roof can now be constructed. It replaces conventional wood or steel rafters, tar paper and shingles.
-
Most popular related searches
We have what you are looking for!
We have what you are looking for!
A fast and secure installation. Our mounting systems were developed with the installer in mind. A clean and pleasing appearance of the roof is always one of our considerations.
Your advantages:
- an esthetic installation without protruding hardware
- simple and efficient installation
- The Galaxy Energy system is engineered to absorb expansion and contraction factors such ensuring a stress free installation that avoids cell cracks
Using the Galaxy Energy inroof system will also gi...
Using the Galaxy Energy inroof system will also give you a winter advantage.
The completely enclosed total module roof service without protruding hardware gives the roof a slide factor to reduce snow accumulation which results in a higher power output during the winter month.
Often the installation fails on the disagreement i...
Often the installation fails on the disagreement in term of the aesthetics .
- Even this criticism we have put an end!
- A more esthetic look can be achieved by using the Edition black modules.
- Light domes and roof windows are replaced with the transparent modules.
More flexibility to meet your requirements!
More flexibility to meet your requirements!
The newly developed 80/40 inroof profile is the third girder cross section in Galaxy's product range, it now enables slimmer construction possibilities.
Your advantages:
- Already existing terraces can be easily retrofitted with PV. Very often the substructure with small crossmembers already exists and can be reused.
- Ideal for inroofs in the housing sector, as an alternative to roof tiles and onroof systems.
Example:
2 layers lathing, tiles, roof hooks and PV modules = 30 cm mounting height 50 kg/m² roof tiling + 13.8 kg/m² PV onroof system = 63,8 kg/m²
Crosspieces all 1.50m, 80/40 profile, PV module = 15 cm mounting height 1,1 kg/m² crosspieces + 15.1 kg/m² 80/40 inroof profile = 16,2 kg/m²
Half construction height! ¼ of weight!
Spans up to 1.50m and roof overhangs up to 75cm are possible
Less weight and more light after renovation
- Old roofs with small purlin distances (max. 1.50m) can be renovated all over with only a third of its previous weight.
- The roof surface is totally even, generates 160 Watt/m² and allows additionally 10% daylight into the building.
Complete inroof with cover shield and sealing profiles
- Of course, the 80/40 profile is compatible with all inroof components.
The Galaxy Energy inroof system can be effectively...
The Galaxy Energy inroof system can be effectively used to replace old roofs.
- The use of solar modules on roofs that have any asbestos components is in Germany prohibited by law.
- Old roofs that have asbestos built in can now be dismantled and make solar ready.
- The existing wood rafters do not have to be removed.
- The inroof rafter will become the load bearing component of the roof.
- A special climate resistant seal guarantees a leak proof system and also allows for any expansion such preventing any built up of stress in the modules.
Complicated assembly instructions belong to the pa...
Complicated assembly instructions belong to the past.
- Because by a quick and easy installation, costs and big mistakes can be avoided!
- With only 8 components and just a few tools, the roof system can be built.
Components of the roof system
- The rafters can be mounted in two ways: with a wedge insert lyingon the purlin (reeroofing) or with a purlin, which already has anexisting roof slope angle (new building).
- In both types of mounting two rafter clamps are used per purlin. In addition, the rafters can be mounted on any type of steel purlins. To avoid contact corrosion, deposits of plastic / rubber betweenpurlins and rafters is recommended.
- Four pre assembled dual clamps per solar module consisting ofthe clamp, lockbar, srew and retrainer spring, allows a fast andeasy mounting of the modules to the rafters.
- A cover shield is snapped into the dual clamp to prevent accumulationof debris and allows an easier slide off ice and snow. The cover shield is anodised for our edition module in the color black.
- The Galaxy Energy PPC module seal protects the system at eight points against the penetration of water.
- The sponge rubber seal placed into the rafters and prevents the capillary action between rafters and module.
- To finish the sides of the installation, a square tube is attached. An additional flashing can also be clamped under the tube.
Become a professional Galaxy Energy inroof install...
Become a professional Galaxy Energy inroof installer
- A 20 year warranty can only be given if the roof is installed by a Galaxy certifid installer.
- A theoretical and practical training is necessary to become a certified Galaxy installer.
Customer reviews
No reviews were found for Galaxy - Inroof System. Be the first to review!