Noah Electrical - High Voltage High Frequency Pulse DC Power Supply System

Plasma Power Supply

(High voltage high-frequency pulse DC power supply, high voltage narrow pulse power supply)

Composed of two parts:

1. Control cabinet: frequency conversion, pulse modulation, and power control system;
   
2. High voltage generator: boosts, rectifies, and outputs high-voltage pulse current.

A. Plasma deodorization: ionization+advanced electrochemical oxidation to remove various industrial odors.
B. Removing white smoke: White smoke is actually a mixture of haze, fog droplets, and particulate matter. The exhaust gas humidity is too saturated, and ordinary pure DC power supplies will ignite and cannot work properly. Noah plasma power supply is a pure pulse square wave power supply that does not ignite in a humidity supersaturated environment and operates stably at high voltage; Pulse power supply has high energy and can capture droplets and dust as small as 1 micron, so it can remove white smoke.

C. Excluding yellow smoke: Yellow smoke is the use of nitric acid in industrial production. Nitric acid is extremely unstable, and the nitrogen dioxide produced by decomposition is brownish red, also known as yellow smoke. Noah plasma power supply, with an energy of 20eV, undergoes advanced electrochemical oxidation to form NO3. NO3 dissolves into weak nitric acid when it comes into contact with water, and is adsorbed onto the anode as droplets. It is neutralized by spraying alkaline water to clean the electric field. The yellow smoke has been eliminated.

D. Removing green smoke: Green smoke is composed of small particles, usually with a diameter of 1 micron to 10 microns. This is the case with the green smoke produced by smoking. Ordinary DC power sources cannot charge it, but Noah`s electricity uses high-voltage pulse DC power sources with high energy to charge it negatively, and then deposits it on the anode tube wall under the force of an electric field, achieving the effect of removing green smoke. The green smoke produced by metal drawing plants, chemical plants, heat treatment plants, smoke plants, and asphalt plants can all be removed.

E. Dust removal: High voltage pulse DC power supply with unique breakthrough corona sealing and anti corona functions.

F. Other industries with special purposes:

(1) High frequency high-voltage pulse DC power supply plays a crucial role in the process of X-ray generation. It is mainly used to provide high voltage to the cathode and anode of X-ray tubes. Under high voltage, the electrons at the cathode acquire sufficient energy to rapidly impact the anode target material. When these high-speed electrons suddenly decelerate, some of their kinetic energy is released in the form of X-rays, producing X-rays that are used in various fields such as medical imaging and industrial testing.

(2) The high-frequency high-voltage pulse DC power supply mainly has the following functions in electric puncture disinfection and sterilization. High frequency and high-voltage pulses can generate strong electric fields. This strong electric field can alter the transmembrane potential of microbial cell membranes, leading to the formation of small pores, known as electroporation. When the permeability of the cell membrane is altered, the internal balance of microorganisms is disrupted, causing leakage of cellular contents and resulting in microbial death. At the same time, pulsed electric fields can also cause charged particles inside microbial cells to move vigorously under the action of the electric field, collide with each other, and destroy the structure inside the cell, such as ribosomes, nucleic acids and other biomolecules, thereby achieving the effect of disinfection and sterilization.

(3) High frequency high-voltage pulse DC power supply can also be used for ion implantation process in chip production.