Blue M - Industrial Batch Ovens

• Heavy-gauge steel exterior and interior panels
• Welded 14 and 16 gauge cold-rolled steel exterior
• Stainless steel-reinforced Type 304 interior
• Fiberglass insulation - 4 full inches minimizes heat loss
• Double-wall insulated doors (double doors) are utilized on 48-inch wide models
• Side-mounted control compartment for easier control access on 60 and 96 cu. ft. models
• Manually adjustable intake/exhaust system

• Stainless steel slotted shelves
• High power for fast heat-up, high exhaust for large loads
• Door switch
• Motorized intake damper (2 position or proportional)
• Welded and sealed inner chamber (vapor-tight)
• 24-hour, 7-day programmable time
• Circular chart recorder-10"
• Reverse door hinge
• Redundant over-temperature protection

• Additional lead-in ports
• Interior light
• Glass observation panel(s)
• Rear access door(s)
• All stainless steel construction
• Special controls systems
• Multi-door configurations for process flexibility
• High-temperature capability of 399°C (750°F)

• Stainless steel roll-in racks
• Roll-in rack shelves
• Special truck channel or flat uninsulated floor for customer designed racks
• Custom designed roll-in racks for product fixturing
• Pass-through "tunnel" design with front and rear doors

• Standard temperature range: 15°C (27°F) above ambient to 316°C (600°F)
• High temperature model temperature range: 15°C (27°F) above ambient to 399°C (750°F)
• Control accuracy: +/-1.0°C (+/-1.8°F)
• Resolution: +/- 0.1°C (+/- 0.1°F)
• Workspace capacity: 16.0 to 96.0 cubic feet
• Heat up time to 316°C (600°F): 60 minutes or less depending on model and voltage, empty chamber
• Uniformity: Blue M can provide varying levels of uniformity; if you have a specific tolerance or specification which must be met, please contact us with your requirements so we can ensure the equipment is designed, tested, and adjusted to meet those requirements

• Nichrome wire heater elements for durability
• Centrifugal type blower wheel for efficient airflow through the system
• Horizontal airflow
• One-pass airflow
• Infinitely variable control (from full recirculation to full one pass) and optional automatic motorized damper for flexibility with your process
• Side-mounted control compartment for easier control access (60 and 96 cu. ft. models only)
• Profiling or single setpoint controls
• Direct drive blower
• Manually adjustable intake/exhaust system for ease of balancing
• Enclosed wiring to meet National Electric Code (NEC) for safe operation

• Standard Cabinet Oven (Model DC), available in an array of sizes
• Standard options available for a High Power, a High Temperature (750°F maximum), and a Truck-In (DCRI) version
• High volume horizontal air recirculation system and electric heating system allow for maximum temperature uniformity in performance
• Differential airflow switch if loss of airflow is detected and shuts down oven's heaters
• Excellent reliability and performance ratings

Applications

• Aging
• Annealing
• ASTM Testing
• Curing
• Drying
• Photo Resist
• Solvents, Coatings, and Paint Curing
• Stress-Relief

Industries

• Aerospace
• Agriculture
• Automotive
• Defense
• Education
• Electronics
• Energy
• Government
• Medical
• Oil & Gas
• Pharmaceutical
• Research & Development
• Rubbers & Plastics
• Semiconductors
• Telecom
• Textiles