Tmax - Model TMAX-YF -Lab Pouch Cell Vacuum Sealer Sealing Machine for Pre-Sealing in Glovebox

Model Number:TMAX-YF
Type:Vacuum Sealing Machine
Compliance:CE Certificate
Warranty:Two Year Limited Warranty With Lifetime Support
Payment:T/T, Credit Card, Paypal, LC, Western Union
Delivery Time:3 Days

• the head is made of copper material, which has good heat transfer effect, saves power consumption, improves work efficiency and saves energy compared with similar products;
• The pressure of upper and lower heads can be adjusted by pressure regulating valve to meet the requirements of different process parameters;
• The upper and lower heads are driven by cylinder and guided by two linear guide sleeves, which can move up and down flexibly and guide accurately
• Ensure the requirement of parallelism after edge sealing;
• Through the perspective window, we can observe the changes in the cavity when working.
• The cover cavity is driven by cylinder and guided by rotating guide sleeve, which can move up and down flexibly and guide accurately to ensure the sealing requirements of products.
• It can be used for batteries of different specifications, and the adjustment is simple and convenient.
• The main engine and control box are designed separately, so that the machine can work in glove box or on assembly line.
• Simple operation, beautiful appearance, small volume and light weight.

Chamber: The chamber is made of aluminum alloy, which is corrosion resistant and has a firm structure;
Vacuum degree: The vacuum degree can be adjusted up to -95Kpa (the buyer shall provide the vacuum pump);
Head temperature: Room temperature~250?, temperature adjustable;
Temperature control accuracy: ±2?;
Heat sealing pressure: 0~7Kg/cm2 adjustable;
Heat sealing time: 0~99 seconds adjustable;
Edge sealing width: 5±0.4mm (can be customized)
Maximum edge sealing length: 200mm (can be customized, such as 300/400/500mm sealing length)
Seal thickness range: 60~300um
Seal thickness accuracy (mm): Sealing thickness difference between any two points<15um
Air consumption: About 0.2L compressed gas per seal once.
Working speed of air compressor: ≥180 times/h
power: Using 300w heating tube, the power consumption when heating is about 0.6KW.
Power Supply: 220V/50Hz;
Compressed air source: 0.5~0.8Mpa; When used in the glove box, the cylinder power source must use the same working gas used in the glove box;
Working chamber: 470mm*485mm*435mm;
Control box: 420mm*325mm*225mm
Equipment weight: About 50Kg