- Home
- Equipment
Refine by
Hilliard Energy Equipment & Supplies
51 equipment items found
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M400HS brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M400HS brake caliper is capable of producing a maximum 12,960 lbf (57.6 kN) of braking force at 1800 psi (124 bar) and has been ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard offers a Continuously Variable Transmission that is more advanced than any other belt drive system currently on the market. The Hilliard clutch system utilizes a tight belt which allows for seamless engine braking and belt protection at start up and during overload situations, to extend belt life. Hilliard's CVT system is designed to fit a wide variety of clutch envelopes, so no ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO portable filters are an economical solution for removing water and particulate from oils, fuel and other fluids. Filters can be built to ASME Code standards. Hilco portable filters can be used for many different fluids, including: Mineral-based lubricating, hydraulic, and insulating oils Synthetic lubricating and hydraulic (EHC) fluids Fuel oils, kerosene, gasoline Ethylene glycol mixes ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The patented Hilliard Extreme Duty Centrifugal Clutch has been engineered in pulley and sprocket versions to provide long service life and is ideal for retrofit or new equipment applications. A thermodynamically designed clutch shoe increases the clutch's capacity to absorb heat without damaging the integrity of the ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Extreme Duty Pulley Centrifugal Clutch is ideal for retrofit or new equipment application. The clutch was designed to be a low-cost upgrade to the current low-priced centrifugal market and is ideal for the everyday demands of chipper, shredders, power trowels, concrete mixers, power screeds, air compressors, lawn and garden equipment and ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M500SH/HR brake caliper is a spring applied, hydraulically released brake for use in heavy duty industrial applications. The brake comes standard with marine grade epoxy paint suitable for outdoor environments. The M500SH is available with standard force ratings. which when paired with the correct disc size produces an exact braking torque for the application. The caliper features ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Electric Start Assemblies deliver reliable 24 V DC starting power with solenoid-actuated Positork drives. Designed for SAE-3 mounting, they offer clockwise and counterclockwise rotation options and deliver up to 80 ft-lb torque. Engineered for rugged industrial use, these starters ensure smooth, dependable engine starts in marine, power generation, and oil & gas ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard standard disc hubs are supplied with parallel or tapered bores and keywayed to accommodate customer requirements. Hubs are manufactured from either iron or steel. Special hubs with keyless locking devices are also ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard Auto-Lok Differential offers equal power transferred to both wheels on an axle regardless of traction, allowing positive back drive through both wheels. The self- contained unit locks and unlocks automatically providing the benefits of both an open and locked differential, depending on the ground conditions. Benefits include improved traction and easier operation and ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The A400 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The 400 requires a minimum disc diameter of 24" and is offered in 2 sizes to accommodate a 1" and 1-1/2" thick disc. The design of ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M400SH brake caliper is a spring applied, hydraulically released brake for use in heavy duty industrial applications. The brake comes standard with marine grade epoxy paint suitable for outdoor environments. The M400SH is available with standard force ratings which when paired with the correct disc size produces an exact braking torque for the application. The caliper features ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Inferno Fire racing clutch is the latest engineered product for the racing industry. The Fire clutch includes all of the design advantages of the Flame with several new features that make the Fire the best drum clutch available on the market. The Fire clutch has a bonded friction lining that improves consistency and performance. The friction material has been engineered to have a dynamic ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise control of brake pressure. Equipped with manual overrides and hand pump for power outages, high pressure filtration and control braking mode to meet sophisticated braking system ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M900SH brake caliper is a floating spring applied, hydraulically released brake for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M900SH is capable of producing 170,000 LBF (750 kN) of braking force. The floating design can accommodate up to 1 inch of axial ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M500HS brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M500HS brake caliper is capable of producing a maximum 27,000 lbf (120 kN) of braking force at 1600 psi (110 bar) and has been ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Flame clutch includes all of the design advantages of the Fury but also includes several additional features. The clutch is fully tunable with optional weights. The optional weights alow the racer to make small adjustments to the engaging speed for optimal performance. The shoes have been designed to reduce chatter and provide smoother engagement over the Fury clutch. The shoes are lighter ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Fuel Gas Strainers are custom-engineered duplex or simplex basket strainers built from wrought materials—not castings—for superior flexibility and serviceability. Designed to ASME Code standards, they accommodate mesh-lined or perforated baskets and offer options like internal bypass, differential pressure gauges, and varied material constructions to fit oil & gas, power ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M200 brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M200 brake caliper is capable of producing a maximum 5,000 LBF (22 kN) of braking force at 1600 PSI (110 Bar) and has been designed for ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is off ered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The H3 Power Unit is Hilliard's most advanced brake control system. With a PID Loop Control, the BBH3 Power Unit is capable of monitoring speed. The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise control of brake pressure. Equipped with manual ...