Li-ion Tamer - Model PN 241022 - Fault Detector - Module
The Fault Detector – Module Level product is a lowpower and compact device that monitors lithium-ion batteries for increased safety. The monitor is integrated into lithium-ion battery systems and provides a signal that indicates whether a single cell within the module has experienced an off-gassing event.
Details
Our products provide value through gas sensing that is acutely sensitive to battery electrolyte solvent vapors. This sensing ability is paired with proprietary algorithms and creates a product that can detect a single cell failure without electrical interrogation or mechanical contact of the cells. At times, the Fault Detector can detect battery failures prior to traditional monitoring methods such as temperature and voltage monitoring. By delivering warning well ahead of thermal runaway the Fault Detector enables battery failure prevention.
The utilization of off-gas monitoring creates a completely independent perspective of battery health that can be used to provide an extra layer of safety for your lithium-ion battery systems.
Key Features:
- Compatible with all lithium-ion battery form factors and chemistries
- Parts-per-million level detection threshold
- Calibration-free product
- Distributed sensing network provides localized gas detection
- Provides early warning of lithium-ion battery failures
- Long product lifetime
- Fast response time to off-gassing events
- Highly reliable output signal
- Low power consumption
- Several mounting options
- Unobtrusive sensor with easy installation
- Independent and redundant perspective on battery health
Physical Description:
The Fault Detector Module Level product consists of an off-gas monitor with several mounting options, intended to be placed within a battery module. The product then offers sensing capability of gas space around the battery module and will have the capability to provide early warning of battery failures. *Custom cable lengths are available. Adapter available for bare wire usage.
- Part : Dimensions
- Sensor : Ø 28.6 x 25.4 [mm]
- Monitor cable : 165 [mm]*
- Connector type : Female RJ45
- Wire type
- Brown (POWER +)
- Green/White (GND)
- Brown/White (SIGNAL +)
Environmental Description:
The Fault Detector product is intended to be integrated into spaces with lithium-ion batteries and, therefore, has very similar specifications to that of a standard lithium-ion battery system.
- Condition Specification
- Temperature (Operate) -10 to +60oC
- Temperature (Store) -10 to +70oC
- Humidity 5 to 95% RH
- Max temperature change 8.6oC/min
Electrical Description:
The Fault Detector product provides signals specific to the battery module where it is installed. With this localized signal, you will be able to know not only when your battery module is experiencing a problem, but also you will have early warning of a fully developed lithium-ion battery failure. Signal outputs from the Fault Detector can be tied into a BMS or other controller
Detail Specification
- Controller power input 3 - 16 VDC
- Power consumption 275 mW (@ 5VDC and 25oC)
- Output signal (error state) 0.10 VDC
- Output signal (warm up) 0.25 VDC
- Output signal (OK) 0.50 VDC
- Output signal (alarm) 3.0 VDC (see graph below)
Customer reviews
No reviews were found for Li-ion Tamer - Model PN 241022 - Fault Detector - Module. Be the first to review!