Digitize - Model MeshSentry II - Mesh Radio Network Power Supply and Charger
The Digitize MeshSentry II Mesh Radio Network is an integrated power supply and battery charger designed specifically for Mesh Radio Transceivers. This system includes a Fire Listed Power Supply that delivers continuous power to the Mesh Radio Transceiver and ensures 72 hours of battery operation during power outages. The power supply system supports remote supervision with features like AC power fail alerts, battery status checks, and enclosure tamper monitoring. It is housed in a lockable steel case capable of accommodating two 75 Amp Hour 12 volt batteries. The VersAlarm Controller interfaces with the power supply, manages eight zone inputs, and supports optional Q-Mux Node controllers through Ethernet connectivity. The system's expansion capability allows for the integration of up to 32 optional Q-Mux Nodes, supporting a potential total of 3,168 remote input and relay outputs. The indoor enclosure is of compact dimensions, ensuring installation adaptability.
The Digitize MeshSentry II™ Mesh Radio Network - Supervised PoE Power Supply / Battery Charger and Mesh Radio is a complete power solution for Mesh Radio Transceivers. The Fire Listed Power Supply will power the Mesh Radio Transceiver and provide 72 hours of battery backup during a power failure. All aspects of the Power Supply are remotely supervisable including: AC Power Fail, Low or missing battery, and enclosure tamper.
The Power Supply is housed in a lockable steel enclosure that can hold two 75 Amp Hour 12 volt batteries.
The Digitze VersAlarm™ Controller monitors the power supply, 8 zone inputs, and optional Q-Mux Node controller(s) via Ethernet through the Mesh Radio Transceiver. Expandable to 32 Optional Q-Mux Nodes allows for up to 3,168 additional remote input and or relay outputs.
Lockable Indoor Enclosure measures approximately 22” Wide x 12” Deep x 20” High.
- Complete Supervised Power Supply and Charger for Outdoor Mesh Radio Transceivers.
- Mesh radio Includes enabled Dual Transceivers and MIMO
- 8 EOL Zone Inputs for Local Connection (3 zones reserved for AC, DC and Tamper)
- 72 Hours of Battery Backup. Recharge in 48 hours
- Operates from 120/240 Volts AC (jumper selectable), 50-60 Hz
- Fully Supervised Operation when used with Digitize System 3505 Prism Lx™ at the Head End.
- Enclosure houses two series 75 Amp Hour 12 VDC Batteries
- Expandable to 3,168 remote inputs and or relay outputs
- Ethernet Connections expandable with Internal Switch/Router
- Internal Visual and Audible indicators (user selectable)
- Wall Mount Lockable Steel enclosure with Door Tamper signal
- Fused Outputs
- Surge Protected Power and Ethernet Connections
- Class 2 Power Limited
- Short Circuit, Over Current, & Over Temperature Protection
- Form C Relay Output
- UL 864 Compliant