- Home
- Companies
- Elmetron Sp. j.
- Products
- Model CX-105 - Pocketsize Waterproof ...
Model CX-105 -Pocketsize Waterproof Multifunction Meter
CX-105 is a multipurpose meter which enables making different kinds of measurements depending on the type of the chosen head. Complete set of heads enables following measurements: pH, mV, redox potential, conductivity, salinity, TDS, oxygen dissolved in water in mg/l or %, humidity with possibility of determining the dew point, temperature of the surface and temperature of liquids or air. The user may choose appropriate heads. Good accuracy and minimised size.
- Simple pocket size meter.
- Depending on the chosen measuring head it measures pH, redox potential (ORP), conductivity to 100 mS/cm, salinity, TDS, dissolved oxygen, humidity and temperature.
- Despite small size the meter offers a relatively wide conductivity measuring range.
- pH electrode calibration in 1 to 3 constant points (4.00, 7.00, 9.00 pH), conductivity cell calibration in 1 point.
- Lack of pH electrode parameters readout.
- No memory or PC connection.
GP-105 - for pH and temperature measurement in water with low deposit content;
GPX-105s - for pH and temperature measurements in waste water or other viscous samples;
GR-105k - for redox potential and temperature measurement, electrode with cable;
GC-105 - for conductivity, salinity and temperature measurement;
GO-105 - for oxygen dissolved in water, in % or mg/l and temperature measurements, probe without cable;
GO-105k - for oxygen dissolved in water, in % or mg/l and temperature measurements, probe with cable;
GT-105 - for accurate temperature measurement, without cable;
GT-105k - for accurate temperature measurement, probe with cable;
GH-105 - for humidity and dew point measurements, sensor without cable;
GH-105k - for humidity and dew point measurements, sensor with cable;
GH-105p - for humidity and dew point measurements, sensor without cable but with Chinch connector for surface temperature probe, what enables deciding if painting on the surface in existing conditions is advisable.
- pH head calibration in 1 to 3 points.
- Automatic detection of the buffers: 4.00, 7.00, 9.00 pH (optionally: 4.00, 7.00, 10.00 pH).
- Automatic temperature compensation.
- Accuracy: 1 mV.