Model FX-2 -Programmable Automated Fuel Filtration Systems
FX-2 Programmable Automated Fuel Filtration Systems are self-contained, stand-alone systems that remove and prevent the buildup of water, sludge and contaminants in tanks.They stabilize diesel and bio-fuels, eliminate microbial contamination to optimize and maintain fuel quality FX systems guarantee Optimal Fuel Quality for Reliable Power at All Times.
- All FX-2 Systems feature:
- Multi-stage water removal and particulate filtration
- NEMA 12,13,4 Powder Coated or Stainless
- UL508A Smart Filtration Controller
- Continuous-Duty Pump, Viton Seals
- Stainless Steel Plumbing
- Stand-Alone, Reliable &Turn-Key
For safe operation, the FX-2 Series`Touch-Screen Controller triggers automatic alarms and shuts down the
pump when filters need service; a leak is detected; high separator water level, high filter vacuum, or high pump pressure occurs; or when the fuel flow is out of range. Implementing FX Series Fuel Quality Optimization & Maintenance Systems guarantee Optimal Fuel Quality for Reliable Power At All Times. FX Series prevents downtime, periodic tank cleaning, replacing out-of-spec fuel and fuel-quality related injection system repairs.
Preventive Maintenance Plans for mission-critical power are essential. However, most service agreements do not cover fuel-related engine failures. Fuel has a limited shelf-life and even "fresh fuel"could contain water, sediment, microbes and bio-fuel components upon delivery. Periodic generator tests-runs are too short to determine if fuel quality is adequate for the demands of continuous, full-load operation. In fact, generator test runs significantly accelerate the fuel polymerization and degradation process by returning fuel that has been compromised by heat and pressure back to the tank.
Potential liabilities can easily be avoided by implementing an FuelGard Quality Maintenance Prograrres part of every disaster recovery plan. An FX-2 automatically maintains fuel quality and guarantees reliable emergency power whenever it is needed.
The system is automatically operated by the programmable UL508A Touch-Screen Controller with Modbus, TCP/IP, LAN and Internet connectivity. All components and control devices are contained within a fully enclosed, lockable, weatherproof, NEMA-rated cabinet.
The principal components are a continuous-duty motor with coupled gear pump, a strainer/primary coalescing filter with vacuum sensor and gauge, a secondary water block fine filter secondary water block fine filter with pressure gauge and sensor. The FX primary filter protects the pump, coalesces and removes water and particulate. The secondary filter is a quick-change spin-on filter designated to remove dissolved and emulsified water and contaminants dow to 1 p.