- Home
- Companies
- ETREL d.o.o.
- Products
- Model Load Guard - Charging Equipment
Model Load Guard -Charging Equipment
Load Guard is a sensor installed in the building‘s electric cabinet where it measures the electrical currents and sends real-time data to the charging station. It is especially important in situations where charging stations do not have a dedicated power supply but rather share available power with other consumers in the building. INCH charging stations respond to received data by reducing the charging power to keep a total load of the installation below the installation rated value, or by increasing it to utilise the remaining available power for faster charging.
Dimension: 9,1 x 5,4 x 6,2 cm or 3 DIN rail slots
Clamp cable length: 70 cm
Clamp diameter: Small: 16 mm, Large: 24 mm
Connection: 1-phase or 3-phase
Max Rated Current: 150 A or 400 A per phase
Communication: Ethernet
Configuration and monitoring: Charger Web interface
SAFE AND COST EFFICIENT HOME CHARGING
Load Guard helps prevent installation overloads by lowering charging power when household consumption peaks. By shifting charging times to lower household consumption periods, INCH chargers reduce the charging cost.
As Load Guard measures electric current in both directions, the charger can calculate surplus energy for example from renewable energy sources, such as photovoltaics. Green energy can be used for faster and cheaper charging, thanks to algorithms in INCH charging stations.*
*applicable when the charging power is limited due to local consumption.
Prevent overloads by automatically shifting charging times to off-peak hours and setting the max power for the cluster. Increase grid connection point power only when necessary.
Monitor and manage charging through the advanced web interface either from a phone or computer. The web app works on any device in the same network and gives the user an in-depth insight into charging energy consumption.