- Home
- Companies
- Salgenx (division of Infinity Turbine ...
- Products
- Salgenx - Modular Block Cell ...
Salgenx - Modular Block Cell Electrolyzer Unit
Stack these up to make a full electrolyzer stack and full battery. 1.1 Voltage factor (i.e. 12V = 12 x 1.1 = 13.2 V charging). Divide by 1.6 V as lowest discharge. Round up and decimal units to make next higher cell voltage.
Blade $10,000 product (plus shipping).
1.6-1.8 V discharge cell voltage.
12V = 8 cells good for SAMx and lower.
24V = 17 cells good for SAMx and S3000.
48V = 33 cells good for SAMx and above S3000.
120V = 83 cells good for S6000 and S12MW.
240V = 165 cells good for S12MW and S18MW.
500V = 344 cells good for S12MW, S18MW and larger.
Larger total voltage can service larger electrolyte tank capacity.
Dimensions: 20 in (508 mm) height x 30 (762 mm) in length x 12 in (305 mm) wide.
Does not include electrolyzer flow bar manifold.
Inputs: Aqueous and Organic
Outputs: Aqueous and Organic
Sensors: Volts, amps, temperature, pH, flow, optional ports for added sensors (future proof).
First few versions are still in Beta stage (not final product).
Non-disclosure agreement has to be signed prior shipment.
The front panel of the Salgenx Flow Bladex Electrolyzer module will have basic user inputs for ease of setting up, operation, and maintenance.
The panel is like a server blade in that you can number it up to increase battery system voltage and current.
Since it is a flow battery with aqueous and organic fluid flows, there are view ports which not only allow visual eyesight monitoring, but also via a camera, laser, or other optics which allow remote viewing or sensing.
There are two electrode panels which are easily removable for servicing or replacement if needed.
A simple digital status and operation indicator are available.