Sunpark Light - Modular Solar Carport

MATERIAL
100% aluminum structure and components, stainless steel bolts & nuts.

MAX SNOW LOAD
Can be designed for any snow loads (up to 100 PSF

MAX WIND LOADS
Can be designed for any wind loads (up to 180MPH)

TILT ANGLE
15 typical

PV PANEL ORIENTATION
Landscape on rails (supported on the long side of the panels)

MODULE
Any framed PV, any frameless PV, monofacial or bifacial, optimized for bifacial

SEALED
Water-managed with rubber gaskets.

CONFIGURATION
Single row parking coverage or dual rows with a back to back carport configuration

FOUNDATION TYPE
Any (helical piles or screw piles typical, concrete footings is also possible, but more disruptive for the property)

INSTALLATION
100% aluminum structure, super light, all parts can be manipulated by hand. Can be assembled without heavy machinery

PANEL HEIGHT FROM GROUND
Customizable, typically 12-14.5 feet (3.6-4.4m).

GROUNDING
UL 2703 listed

TYPICAL BIFACIAL GAINS OBSERVED
5-25% (N-Type, on black asphalt. Must be optimized per project, not a guarantee.)

NO ON-SITE WELDING
All Opsun Carports are assembled with bolts and nuts. No welding and no cuts will be necessary on site.

ARCHITECTURAL DESIGN
This architectural solar carport combines high energy generation without compromizing the look of the structure. Using frameless bifacial PVs will add to the elegance of the carport. This structure will blend perfectly in residential as well as light commercial installations.

PEACE OF MIND INSTALLATION
Installing new infrastructures could disturb a propery for a long period of time. Opsun`s SunPark Light has been designed to minimize the installation time and operations while avoiding the use of heavy machinery, allowing for a fast and cost effective installation. All parts are aluminum made and can be lifted by hands, while the foundations can be done with the use of helical piles that do not require any excavation work. That`s peace of mind!

PERFECT FOR EV CHARGING STATION
The SunPark Light is the perfect match for EV charging stations and complements the green movement of the electrification of transport by enabling a clean generation of the energy required to charge your electric vehicle. Go one step greener by adding the SunPark Light to your EV charging station.

IDEAL LOOK WITH BIFACIAL PANELS
Panels encastrable in the aluminum rails, all wires hidden, all junction boxes hidden. Opsun Bifacial Carports take advantage of bifacial panels` transparency to increase aesthetics from underneath.

EV CHARGING STATION READY
Fits perfectly the requirements for electric vehicles (EV) charging requirements.

FULL ALUMINUM DESIGN
100% aluminum design with 6000 series aluminum and 304 stainless steel bolts and nuts guarantee maximum durability of the structure for decades.

BETTER PANEL PROTECTION
Strong rails supporting PVs on their full length help prevent torsion and movement that leads to accelerated degradation of PV panels.

EASE OF INSTALLATION
Light in nature, all parts can be lifter by hand, without heavy machinery. Foundations can be done using screw piles or helical piles to avoid heavy machinery and disrupting the parking activities.

UL 2703
ETL listed to UL 2703

MODULAR CONFIGURATION
The same structure can be adapted to different carport sizes.