iCenta - Model Pro V M22 EM - Multi-Variable In-Line Vortex Heat Meter
The Pro-V M22 is a precision multi-variable in-line vortex flow meter utilising three primary sensing elements: a vortex shedding velocity sensor, an RTD temperature sensor, and a solid-state pressure transducer to measure the mass flow rate of liquids, gases and steam in commercial, industrial and municipal applications. Combined with the M22 energy monitoring option, it permits real-time calculations of energy consumption for a facility or process. The meter can be programmed to measure steam, hot water or chilled water.
The Model M22-VTP flowmeter monitors one side of the process, either sent or return, and uses the input from a second separate temperature sensor on the opposite leg of the process to calculate the change in Energy. The local or remote electronics indicate two temperature, delta T, mass total and energy total.
- Easy to install
- No moving parts
- FM, FMC, ATEX, IECEx Approved
Features of the Pro V M22 EM Vortex Heat Meter include:
- Volumetric or mass flow monitoring of most liquids,gases, and steam
- Multivariable meter delivers mass flow, temperature, pressure, and density readings from a single installed device and reduces initial cost, installation cost and cost-of ownership over the lifetime of the instrument
- Compensated mass flow reading of liquids, gases, and steam
- Energy Monitoring–ability to compute and output energy use
- Easy to install and commission
- Reliable–no moving parts, no fluid to sensor contact
- High accuracy with rangeability up to 100:1
- Temperature up to 750°F
- Pressure up to 1500 psig
- Inline configuraton for pipes from 1/2”- 8” DN15 to DN 200
- Field configurable ranges, outputs and displays
- Remote electronics option available for use in harsh environments or locations with limited access
- 4-20mA loop–powered Mass Meter design saves on energy costs
- HART protocol communications – Standard
- Modbus communications available
- FM, FMC, ATEX, IECEx Approved
A precision multi-variable in-line vortex flow meter with energy monitoring option for real-time calculation of energy consumption for a facility or process.
Specification Detail for the Pro V M22 EM Vortex Heat Meter:
Pipe Size
DN15 – DN200
Material Body
Carbon steel, stainless steel, hastelloy
Flow Range
0.2 – 970 m³/hr
Accuracy
100:1
Operating Temp Range
-200 to 400°C
Pressure Range
2 – 175 bar
Outputs & Comms
Analogue, pulse, HART, DCL, MODBUS
Insertion / Inline
Inline
Fluid Type
Clean water
Applicable Liquids
Water
Power
4-20mA loop, 12-36 VDC, 85-240 VAC
Approvals
FM, FMC, ATEX, IECEx
Connection Type
Flanged, wafer, ANSI, PN