Multical - Model 302 - Compact Thermal Energy Meter
The meter can be configured on site for installation in the inlet or outlet position enabling easy stock planning and holding.
The compact heat/cooling meter MULTICAL 302 can be rotated during installation within narrow dimensions enabling optimal reading of the display at all times in the most confined spaces. This makes it an ideal choice where room is limited for example on heat interface units and in apartments.
As with all MULTICAL® energy meters, this meter employs the highly accurate ultrasonic technology. Every conceivable drop is measured due to the dynamic range 1600:1 from saturation flow to start flow (250:1 from qp:qi) reducing loss of distributed energy.
MULTICAL® 302 has low pressure loss of below 0.1 bar, which reduces the amount of electrical energy required to the circulation pumps in the utility.
The meter is MID approved Class 2. It is available in a limited number of sizes and also comes with option of being read remotely using Wireless M-Bus or M-Bus. Configuration on site
The easy and user-friendly configuration of the meter on-site reduces installation time and errors.
The energy meter, MULTICAL® 302, meets the needs of both installers and meter readers due to its usability and functional design.
By means of a one-button system, MULTICAL® 302 can be configured on-site without any need for special tools or equipment.
According to local requirements, the installer programmes all essential parameters in the energy meter on-site - even the inlet/outlet-position. This reduces stock for alternative meters and saves time.
- Data sheets
- Technical descriptions
- User and installation guides