Technische Alternative RT GmbH

Aton - Power to Heat Meter

FromTechnische Alternative RT GmbH

SHARE

ATON is a plug & play solution for using surplus PV energy – without additional wiring. It consists of an energy meter and an immersion heater, which can be variably controlled from 50 W to 3 kW, for installation in a buffer cylinder. Through a wireless connection, the energy meter (x2-tech) specifies the output the immersion heater can consume. The immersion heater sends all measurements (high limit safety cut-out, internal temperature and the values of the two external sensors) back to the energy meter.

Most popular related searches

immersion heater

energy metering

domestic hot water

energy management

remote energy meter

central heating

domestic water heating

Minimal installation effort thanks to new x2 wireless technology and factory program
Freely programmable for individual requirements
Energy meter and immersion heater are connected ex works
Up to 12 immersion heaters per energy meter
Wireless range ~1 km free space / 2 reinforced concrete ceilings or walls

Optimisation of on-site consumption rate
Central heating backup
Domestic hot water heating outside the heating season (e.g. via a fresh water module)
Limited use with cylinders for drinking water!
DL bus for controlling power controllers for enhanced energy management
Remote access, datalogging and visualisation via C.M.I.

Scope of delivery:

Immersion heater EHS-R 3kW
DHW tank sensor BFPT1000
energy meter CAN-EZ3A
3 current sensors (50 A, the CAN-EZ3 can measure 3x 10 kVA)
external radio antenna

Interfaces:

DL bus
CAN bus
Micro SD card
wireless

The immersion heater is eligible for use in drinking water environments, but eligibility for installation in cylinders for DHW or drinking water is limited by galvanic reactions. Refer to manual for details!