Wildlife Materials Inc.
  1. Companies
  2. Wildlife Materials Inc.
  3. Products
  4. WMI - Model TRX-1000S - Receiver

WMIModel TRX-1000S -Receiver

SHARE

Our finest: sensitive, sophisticated, easy to operate. Locates 200 animals; punch in each frequency number on digital display. Responsive to both strong and weak signals for precise direction location. 1000 KHz frequency range avoids interference with other signals. Attenuator prevents swamping, insures accurate close-in tracking. Noise-blanking circuit reduces unwanted signals. Signal meter needle deflects to show signal strength. Signal meter is backlit to enhance night tracking Flashing LED (light emitting diode) matches signal beep Weight, less than 2 pounds. Dimensions, 7" x 4" x 4 1/2" Rechargeable nicad batteries give 6-8 tracking hours on full charge DC cord allows for external operation from vehicle's 12 v cigarette light Recharge unit, DC power cord and leather carrying case are included Optional lid-mounted throwaway batteries for use away from current Five year warranty on parts and labor.

Most popular related searches
  • Noise Figure: 2.5 dB or better
  • Input Impedance: 50 ohms +/-10%
  • Frequency Range: Standard bands are 150-151 MHz, 150.8-151.8 MHz, 151-152 MHz, 160-161
  • MHz, 164-165 MHz, 216-217 MHz, 217-218 MHz, 218-219 MHz, 220-221 MHz, Other bands available on request
  • Frequency Stability: +/-1 KHz maximum (-20 degrees to +70 degrees C)
  • Image and Spurious Rejection: 60 db or better
  • Minimum Discernible Signal: -150 dBm (.007 microvolts) or better
  • Circuit Design: Modern dual conversion superheterodyne circuit with 8 pole crystal filter and
  • 40 dBAGC range
  • Manual Gain Range: 90 dB or better
  • Frequency Readout: Digital, direct reading in 1 KHz steps; analog delta tune +/- 2 KHz from center
  • frequency
  • Tuning: Three-digit, dust resistant, push wheel switches control digital quartz-locked
  • PLL synthesizer
  • Frequency Resetability: To +/- 500 Hz
  • Signal Metering: 0-1 scale meter with high dynamic range circuit and backlight for night tracking.
  • LED indicator gives linear signal strength-to-brightness response for night use
  • Noise Blanking Circuit: Removes most impulse and ignition noise to enhance tracking in difficult
  • conditions
  • Operating Voltage: 10-15 VDC through external DC jack (fused cigarette lighter cord included)
  • or internal 10-AA cell nicad rechargeable battery pack