Rex - Industrial Control Transformer
Industrial control transformers are used to convert the available supply voltage to the voltage that is required to supply industrial control circuits and motor control loads.
These loads consist of a combination of electromagnetic devices such as solenoid operated valves, switches, bells, alarms, and other components such as indicator lights, timers, electronic equipment, and logic boards.
Some components of a circuit, especially electromagnetic devices require a very high level of power at start-up. This start-up power requirement is called inrush VA. After their initial start-up, these components settle down to a lower power requirement for normal continuous operation. This lower operating power requirement is called Sealed or Steady State VA. Some devices can draw up to 10 times the normal operating or sealed current for periods of up to 50 milliseconds upon start up.
Control transformers must be designed, constructed, and selected to ensure that they provide the output voltage stability needed for trouble free operation of all circuit components.
Rex control transformers incorporate several features to optimize output voltage stability and regulation when supplying industrial control circuits with high inrush current requirements.
- Capacity : 25 to 7,500 VA Single Phase
- Voltage Class :
- 750V Max (CSA)
- 600V Max (UL)
- Cooling : Self Cooled (ANN)
- Frequency : 60Hz (50/60Hz Optional)
- Conductors : Copper (Cu) Windings
- Insulation System :
- 25 - 500 VA Class 130 °C (80 °C temp Rise Max)
- 501 - 7,500 VA Class 180 °C (115 °C temp Rise Max)
- Sound Level : Below 40dBA
- Enclosure Type : Open or Type 1 Enclosed
- Warranty : 12 Months (See Warranty and Limitations)
- Quality System : ISO 9001:2015 Quality Management System
- Certifications :
- CSA Certified
- UL Listed
- Reference Standards :
- CSA C22.2 No 66
- ANSI/UL 506
- NEMA ST-1
- Optional Features & Accessories :
- Suitable For 50Hz Nominal Frequency
- Primary and/or Seconday Fuse kits
- Touch Safe Terminal Covers
- Electrostatic Sheild Installed Between Primary and Secondary Windings
- Epoxy Potted Coils For Harsh Environments
- Designed For CE Compliance.