Rota-JETTER - Model 30 -Hydro-Static Power Unit
This unit operates directly “In-Line” at bottom of open ditch. It also can be operated from shoulder of Road where cleaning Rods flex down into the open ditch if the ditches have standing water in them. This unit is either pulled and pushed through the culvert by hand or the operator can use the built in winch to pull the unit forward and reverse during process.
We have upgraded the Classic direct drive Power unit to have a Hydraulic Pump to provide PTO control. This upgrade gives the operator the full Forward, Neutral, and Reverse PTO control.
This unit still uses the pull winch to reduce operator effort.
NOW! It supports the 9”, 11”, 13”, 16” and 18” Culvert Cleaning Tools.
This has been the main power unit sold over the last eight years. We have also upgraded from the 8.3Hp Engine to the 11hp. This provides greater torque to clean culverts even faster!
A six year old 8.3hp unit has cleaned 30 culverts in one day! The county government uses minimum security prisoners to provide labor for machine operations.
- Movement: Manual Push/Pull or use of Winch.
- Has cleaned a 36” Culvert with 13” Tool.
- Commonly cleans 24” Culvert 35 foot long in less then 40 minutes with just two workers.
- Good Power / Good Torque.