ROTEX MASTER - Model YGKJ 880 - Wood Pellet Machine/Biomass Sawdust Pellet Making Machine
Model:YGKJ 880 Wood Pellet Machine/Biomass Sawdust Pellet Making Machine Main Power:220kw Capacity:3-4 ton per hour Kick-off Driver:3kw Steam Fan:2.2kw Lubrication Oil Pump:0.55kw Reducer Lubrication Pump:1.1kw Die: Stainless Steel ,Double-Layer, Both Side Can Be Used Motor: Siemens Beide Brand Dimension:3000*1500*2300 Weight: 12 t Guarantee: 12 years except spare parts
Wood Pellet Machine/Biomass Wood Pellet Machine
Advantaged of Wood Pellets Mill/Wood Pellet Machine/Pellet Machine PriceFeeding Way
- Vertical ring die pellet machine vertical feeding
Pressing Way
The vertical ring die pellet machine is the mold stationary, the roller roll revolution and rotation - Installation
Main shaft and motor are respectively installed vertically. Power flat drive.
The reserved space of reduction gear box is large, then larger reduction gear box can be installed. Therefore, the reduction gearbox with lower failure rate, stable operation, low power, and large output torque. - The temperature of Chamber room
The speed of main shaft in vertical ring die pellet machine is 75 rpm, and the press chamber is open. It is easy to dissipate heat and the temperature is up to 150 degrees. Therefore, it can be used with high temperature resistant 200° high temperature butter and also can long life of various wearing parts. - Cooling Way
Gear box adopts cooling system,avoid higher oil temperature,service life 5 years gurantee,highly lower the production cost.
Main shaft makes use of the gear box gear oil lubrication,lower the main shaft temperature,improve the main shaft span life.
Lubrication Way
Vertical ring die pellet machine adopts the lubrication way with non-stop and uninterrupted lubrication
FAQ
1. What is the whole process for press wood pellets ?
The whole process of press wood pellet depends on the size and moisture of your raw material.For exmaple, if your raw material is wood logs with diameter about 30cm, and the moisture is about 40%.You will need a whole complete wood pellet line.Including Chipping section-Gringding Section-Drying Section-Pelletizing Section-Cooling Section-Screening Section and Packaging Section.
2. What is the most suitable moisture for press pellets?
The most suitbale moisture for wood sawdust or wood shaving is 12-15%.If your raw material is higher than this moisutre, a dryer is need.
3. What is the suitbale size for press wood pellets?
The suitable size of wood sawdust or wood shaving should a little smaller than finished wood pellets.Of course, if the sawdust is too fine, it also not very good.
4. Is Cooling section necessary or not?
Yes, it is necessary. When the pellets leave the pellet machine, it is very hot, soft and releasing moisture. A cooling process is very important stage,Cooling stablities the pellets and hardens the lignin melt on the surface of pellets and hence the shape of pellets remains unchanged.
If you want a detail information about the wood pellet line , you need to offer us these information.
So we can make a more suitable line according to your requirments.
More Information Maybe you also Concerned
If you want to set up a wood pellet line,You should have:
1) Raw Material ,Make sure you can get enough raw material from your place,
In order to reduce cost, the distance of raw materials from your factory is not far than 50km.
2) Factory.
You should have a factory to lay out your factory, to store your raw material and your finished pellets.
3) Transformer.
For pellet line, you should have a bigger transformer .
4)Staff .
For running a pellet line ,you should have enough staff to run this line, for example, wood chipping section need one or two staff.
Dyer section need one staff, pelletizing section need one staff.
The whole line need one staff to control.
For design a suitable line for your,What we need to know
1) What is your raw material? The size and the moisutre?
2) What is your target capacity?
3) What is the size of your factory?
4)How many hours do you want to work per day?
Rotex Master has its own factory.
If you are interested in biomass wood pellet machinery, welcome to contact us.
Here , we offer the most professional design and good quality wood pellet machinery wtih more reasonable price
With us, your money in safe
Your business in safe.
Welcome to contact us
Email:alice(at)rotexmaster.cn
Tel/Whatsapp:0086 15562616769
www.rotexpelletmill.com