- Home
- Companies
- Enallaktiki Energiaki Single Member ...
- Products
- 2EN WindCube - Model 400s - Scan Lidar ...
2EN WindCube - Model 400s - Scan Lidar System for Wind Resource Assessment
Scanning LIDAR systems, such as the WindCube® Scan 400s, are pivotal in the realm of wind energy, particularly for precise wind speed measurements. Utilizing advanced technology, these devices can direct laser beams in multiple directions, enabling comprehensive coverage of the airspace above them. Their primary application is in wind resource assessments vital for both onshore and offshore wind energy projects. The system's significance is underscored by the anticipated IEC standard 61400-50-5, which seeks to establish technical specifications for wind measurements with scanning lidars. This standardization effort supports the increased adoption of scanning lidar technology across the industry. Additionally, insights from the International Energy Agency's (IEA) task52 working group, where 2EN plays a role, further aim to refine practices for offshore deployment of lidars, ensuring robust data collection and reliability.
2EN performs Scanning Lidar measurements using WindCube® Scan 400s in Greece and abroad. 2En personnel has been trained for the installation, monitoring and controling the system (hard target tests).
Scanning lidar is a type of lidar device with the ability to point the laser in any direction, typically limited approximately to the hemisphere above the device.
Scanning lidars are finding increasing use for wind speed measurements, especially in the field of wind resource assessments for the wind energy industry, both onshore and offshore.
- Ability to perform 3D measurements for multiple points with a single device
- Fully configurable for 360° monitoring.
- Long-range capability which enables measurements at inaccessible locations.
Concerning standardization, there is an upcoming IEC standard (61400-50-5), which will be a technical specification for wind measurements using scanning lidars within the domain of wind energy generation systems.
Furthermore, the International Energy Agency (IEA) task52 working group in which 2EN participates, aims to write a recommended practice for the use of scanning lidars in offshore measurements.