Emiit - Model SHLF108 -Solar Home Lighting & Fan - Jumbo XXL
3 x 3W Dimmable LED LAMPS + 16” Table Fan + 2 USB PORTS with 50w Solar Panel; The complete multi-function, modular and mobile SHLF108 is Jumbo XXL among the Solar Home Lighting products with long lasting hours as follows:
By dimming the 3 LED Lamps in 1W, 2W and 3W level,
You can achieve the following backup hours;
5Hrs with 3 x 3W Lamps or
7.5Hrs with 3 x 2W Lamps or
15Hrs with 3 x 1W Lamps
5Hrs Fan Running with 1W inbuilt Lamp
Individual Dimmable Hi-Power LED Lamps and Controller Level Auto Dimming:
The LED lamps can be dimmed using normal switch with first click for 1w, consecutive second click for 2w and consecutive third click to reach 3w level. Auto dimmable future enabled to conserve power when battery is below 10%.
Energy Saving Algorithm for Extended Backup Hours:
Gradual output port shutdown enables switching off of every port gradually to enable most critical lamp to last longer hours when the battery backup reaches about 10%.
Two lamps are fitted with 5 meters cable each and one lamp is fitted with 8 meters cable to cover larger area of home indoor and outdoor. The lamps are water proof with Ingress Protection Rating – IP 62 as per IEC 60529.
The system comes with 2 USB A type ports with 5.1V 1.2A per port output capacity. The product includes 50W solar panel with 8 meter cable and a multi-link USB cable.
- MPPT charging technology
- 50W Solar Panel with 8 meter cable
- Dual Charging: Solar Panel and/or AC Adapter charging
- Li-ion battery bank for quick charging
- Hi-Power LEDs for more brightness. 110 lumens per watt.
- Dimmable 3W Lamps. Auto dimming future to glow for longer hours.
- Longer Lasting LEDs. Lifetime >40,000 hours
- IP 62 rated lamps for outdoor use
- 16” Table Fan fitted with 1W LED lamp
- 2 USB ports. 5.1v 1.2a per port output. Faster mobile charging.
- Deep Discharge, Short circuit and overload protection.
- Gradual Port Shut off. Longer hours for critical lamp.
- 2 X 3W LED lights with 5 meters cable and 1 x 3W LED light with 8 meters cable
- 50W Solar Panel with 8 meters cable
- USB Multi-line charging cable
- 16” Table Fan fitted with 1W lamp
- Controller unit
- User manual
CONTROLLER SPECIFICATIONS
Charging Type: Maximum power point tracking (MPPT),maintains CC-CV for charging
Input terminal: Dual Source: Solar Input & AC Adaptor Input 2.1mm dia sockets
Load terminal: 1 PORT for Fan, 3 PORTS for LED lamps and 2 nos Mobile Charging ports
Gradual Port Shutdown Algorithm: Port1 shuts at 10% of the battery power;
Port2 shuts at 7% of the battery power;
Port3 shuts at 4% of the battery power;
Port4 shuts at System On/Off: Manual Switch
BATTERY SPECIFICATIONS
Battery Type: Lithium –ion
Battery Voltage: 11.1V
Battery Capacity: 10400mAh
Max Charge Current: 3000mA
Max. Discharging Current: 3600mA
Max. Battery voltage: 12.6±0.05V
Load Disconnect Voltage: 9.3±0.05V
Backup Hours (excluding charging via USB ports): At fully charged condition,
By dimming the 3 LED Lamps in 1W, 2W and 3W level,
You can achieve the following backup hours;
5Hrs with 3 x 3W Lamps or
7.5Hrs with 3 x 2W Lamps or
15Hrs with 3 x 1W Lamps
5Hrs Fan Running with 1W inbuilt Lamp
(Mobile phone charging will change the above timings)
SOLAR PANEL SPECIFICATIONS
Panel Power: 50W SPV with 8 meters cable
Open circuit voltage (Voc): 22.68V (subject to change)
Voltage at max. power (Vmp): 18.54V (subject to change)
Current at max power (Imp): 2700mA (subject to change)
Short Circuit current (Isc): 2940mA (subject to change)
MOBILE CHARGING SPECIFICATIONS
USB Ports: 2 NOS; USB Type A
Max output Voltage: 5.1V±0.1V
Max Current: 1200mA/port
3W DIMMABLE LED LAMP SPECIFICATIONS (Total 3 LED Lamps Provided)
Operation Voltage: 9-15V
Output: 3W max, 110 Lumens per Watt.
Dimmable Function: Dimmed using normal switch with first click for 1w, consecutive second click for 2w and consecutive third click to reach 3w level. Auto dimmable future enabled to conserve power when battery is below 10%.
Light Color: Cool White (6,500K)
Ambient Temperature: 0°C to +50°C while charging; -20°C to +50°C while discharging
Efficiency: >95% peak
Connector Cables with 2.1mm DC jack: 5 meters cable for 2 lamps and 8 meters cable for 1 lamp
Type of Protection: IP62
TABLE FAN SPECIFICATIONS
Nominal Volt: 12VDC
Nominal Current: 1.25A
Rated Power: 15W
Speed: 1200 RPM, 3 speed control: 1000RPM, 1100RPM AND 1200RPM
Air Throw: Wide Angle and Multi-Directional
Case Material: PP+ Rai+Surface Treatment
Colour: White
Blade Dia: 16”, 400mm
Connector Cables with 2.1mm DC jack: 3 meters cable with another end 2.5mm DC Jack
In built LED: 1W
LED Switch: Mechanical Press Type
PACKAGING BOX
Dimension (L X W X H): 570x190x680mm
Weight: 11kg