- Home
- Companies
- Jiangsu Sunpower Solar Technology ...
- Products
- Sunpower - Flat Panel Solar Collector
Sunpower - Flat Panel Solar Collector
Material Copper and aluminum complex solar collector Copper and aluminum complex solar collector . Outer treatment Blue titanium sputtering Black chrome . ConStructure Pipe-sheet Pipe-sheet . Flat plate weight 5.7± 0.1KG 5.3± 0.1KG . Absorption rate 0.95-0.97 0.93-0.95 . Emission rate 0.03-0.05 0.05-0.07 . Frame size 2000 x 1000 x 76MM 2000 x 1000 x 76MM . Frame material thickness 0.85mm 0.85mm . Gross Area(m2) 2.12 m2 2.12 m2 . Lighting Area(m2) 2 m2 2 m2 . Absorber area(m2) 1.83 m2 1.83 m2 . Sealing EPDM EPDM . Cover sheet 1 1 . Cover sheet material toughened glass toughened glass . Cover sheet thickness 3.2mm 3.2mm . Light Transmittance 93% 91% . Bottom cover 0.30mm 0.30mm . Insulation 50mm glass wool 50mm glass wool . Maximum working pressure 0.6MPa . Weight 34kg . Warranty 7 Years.
- Testing Standard GB/T 6424-1997 flat plate solar collector technical specification
- Testing tools Solar heating system solar thermal capacity temperature testing system, electromagnetism flow meter, total radiant meter, high quality dynamic wind speed sensor, steel tape, extraventricular thermometer.
- Testing factor Heat Capacity
- Testing Conclusion According to test, this solar collector heatcapacity is Good. According to lighting area, input temperature Instanteneous Efficiency Curve is η A =0.748-4.580Ti *
- Technic Specification FR (τ . α ) not lower than 0.68 FR. UL not higher than 6.0W/ ( m 2. C) Among them FR: Heat Transfer Factor (< 1), τ : Solar Penetration rate of transparent cover UL: : Total heat loss rate; α : Absorption rate of absorber
- Testing Result FR (τ . α ) =0.75; FR. UL =4.6; Instanteneous Efficiency Curve as below
