Three Phase Double-Wound Industrial Transformers

All transformers are normally supplied in IP22 indoor ventilated enclosures with cable entry and exits. Open type units can be supplied if required.

All of our Three Phase Double-Wound Transformers:

• Have high grade copper windings to BS60317, finished by varnish impregnating.
• Cores have electrical steel laminations to BS/EN10165/10107.
• Have double wound connections. Delta/Star.
• Terminations are to Klippon terminal blocks or nut and stud connections.
• Cases are steel ventilated case for indoor use. Wall or floor mounting. Cable entry via conduit entry and exit holes.

Primary and secondary voltages may be fully customised to your individual specification. As a result, the weight of these units depends on your specifications.

2kVA 3 Phase Double-Wound Transformer

• Cat No.3P2D
• Input Voltage:415V
• Output Voltage:Customer specified
• Rating:2kVA
• Dimensions (mm):317 x 332 x 455
• These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection. Input and Output voltages can be customised to your individual specifications. Can be supplied in ventillated enclosure or as open type units.

3kVA 3 Phase Double-Wound Transformer

• Cat No.3P3D
• Input Voltage:415V
• Output Voltage:Customer specified
• Rating:3kVA
• Dimensions (mm):317 x 332 x 455
• These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection. Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.

5kVA 3 Phase Double-Wound Transformer

• Cat No.3P5D
• Input Voltage:415V
• Output Voltage:Customer specified
• Rating:5kVA
• Dimensions (mm):317 x 332 x 455
• These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection. Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.

10kVA 3 Phase Double-Wound Transformer

• Cat No.3P10D
• Input Voltage:415V
• Output Voltage:Customer specified
• Rating:10kVA
• Dimensions (mm):432 x 300 x 500
• These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection. Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.

15kVA 3 Phase Double-Wound Transformer

• Cat No.3P15D
• Input Voltage:415V
• Output Voltage:Customer specified
• Rating:15kVA
• Dimensions (mm):432 x 380 x 500
• These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection. Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.

20kVA 3 Phase Double-Wound Transformer

• Cat No.3P20D
• Input Voltage:415V
• Output Voltage:Customer specified
• Rating:20kVA
• Dimensions (mm):432 x 380 x 500
• These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection. Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.

25kVA 3 Phase Double-Wound Transformer

• Cat No.3P25D
• Input Voltage:415V
• Output Voltage:Customer specified
• Rating:25kVA
• Dimensions (mm):640 x 460 x 700
• These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection. Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.

30kVA 3 Phase Double-Wound Transformer

• Cat No.3P30D
• Input Voltage:415V
• Output Voltage:Customer specified
• Rating:30kVA
• Dimensions (mm):640 x 460 x 700
• These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection. Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.

40kVA 3 Phase Double-Wound Transformer

• Cat No.3P40D
• Input Voltage:415V
• Output Voltage:Customer specified
• Rating:40kVA
• Dimensions (mm):640 x 460 x 700
• These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection. Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.

50kVA 3 Phase Double-Wound Transformer

• Cat No.3P50D
• Input Voltage:415V
• Output Voltage:Customer specified
• Rating:50kVA
• Dimensions (mm):780 x 560 x 860
• These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection. Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.

60kVA 3 Phase Double-Wound Transformer

• Cat No.3P60D
• Input Voltage:415V
• Output Voltage:Customer specified
• Rating:60kVA
• Dimensions (mm):780 x 560 x 860
• These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection. Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.

70kVA 3 Phase Double-Wound Transformer

• Cat No.3P70D
• Input Voltage:415V
• Output Voltage:Customer specified
• Rating:70kVA
• Dimensions (mm):780 x 560 x 860
• These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection. Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.

80kVA 3 Phase Double-Wound Transformer

• Cat No.3P80D
• Input Voltage:415V
• Output Voltage:Customer specified
• Rating:80kVA
• Dimensions (mm):780 x 560 x 860
• These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection. Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.

90kVA 3 Phase Double-Wound Transformer

• Cat No.3P90D
• Input Voltage:415V
• Output Voltage:Customer specified
• Rating:90kVA
• Dimensions (mm):780 x 560 x 860
• These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection. Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.

100kVA 3 Phase Double-Wound Transformer

• Cat No.3P100D
• Input Voltage:415V
• Output Voltage:Customer specified
• Rating:100kVA
• Dimensions (mm):780 x 560 x 860
• These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection. Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.