Model AUV/ROV - Thrusters - Remotely Operated Vehicles

SeaBotix offers a variation to the standard thrusters for use on alternate systems such as home built, project or production ROVs and AUVs. The high performance, simple to integrate and low cost thrusters have proven popular in many areas.

Proven design and technology
Utilizing the same construction as the SBT150 thruster but removing the LBV electronics make integration simple. A long whip is provided with two (2) wires - Power & Ground. The mounting holes on the thruster provide a simple way to mount to different systems.

Powerful small robust thruster
Continual Bollard thrust is an impressive 2.2 kg f (4.85 pd f) at only 4.25 amps. Peak thrust is 2.9 kg f (6.4 pd f) for short periods by increasing the current. At 4.25 amps the BTD150 thrusters only require 19 VDC making the power requirement only 80 watts.

Complete assembly
Each thruster is fully setup and ready to go. Simply integrate with your system and away you go. Kits include:

• Brushed DC motor and housing
• End caps, prop and kort nozzle

• 1m (39in) whip with 2 wire end
  
  Options, options, options
  There are optional configurations available to match different requirements.

• 2 pin male Subconn wet mateable connector (Part# CN32) Shown above
• Replaces 2 wire whip
• 450mm length
• Shown above
• 2 pin female Subconn wet mateable connector (Part#CN23)
• Replaces 2 wire whip
• 450mm length