Eltek Limited
Eltek - Model GC62 -Transmitters for Temporary Electricity Usage Monitoring
FromEltek Limited
Need to know energy usage in, for instance, a domestic situation? Eltek GenII pulse transmitters and Rayleigh or Elster sub-meter systems provide a precise answer.
Most popular related searches
energy monitor
energy monitoring
solar generator
electrical engineering
energy performance
electricity monitor
electrical installation
- Cost effective and accurate kwh measurement of any number of circuits
- A single transmitter can be connected to up to 8 sensors
- Can be used also with other pulse output device e.g. heatmeter
- Can be used with any Darca software
- Can be integrated with any other GenII transmitter type
60 Series
- GC62: 2 x pulse inputs (200Hz). Includes external DC supply input.
- GD67: 7 x pulse inputs (15Hz). Includes external DC supply input. With display.
- GD68: 8 x pulse inputs (15Hz). Battery powered only. With display.
These transmitters are supplied with 4 x LR6 AA alkaline batteries installed to provide 2 years operation if logging interval > 5 minutes. For logging intervals less than 5 mins an external DC supply (12VDC at 50mA) may be required (Transmitter types GC62 and GD67 only).
- Rayleigh pulse energy monitor can be mounted in consumer unit
- Qualified electrical engineer must install.
- Version available for energy import/export eg. solar generation sytems
- Version with second pulse output for kvarh
Transmitter Specification
Model(s): Sensors and range
- GC62: 2 x pulse inputs (200Hz) with external DC supply input
- GD67: 7 x pulse inputs (15Hz) with external DC supply input
- GD68: 8 x pulse inputs (15Hz)
Common GenII Transmitter Specification
- RF specification: EN300-220
- RF power: 10mW
Environment specification:
- Compliant to EN300-220: -10 to +55°C
- Actual: -30 to +65°C
- Humidity: 100% non condensing
- Environmental rating: IP40
- Dimensions (footprint): 78 x 41mm
- Transmission interval range: 1 sec to 4 hours
- Indicator (red LED): transmit active/on/off
- Control switch (concealed): test mode / hibernate
- Antenna socket: SMA