ZMS - Copper Conductor Low Voltage Power Cable/ XLPE PVC Power Cable

CU Cable Meaning

XLPE cable / Copper conductor power cable, Low voltage Copper armored XLPE power cable is included the following:

The products are mainly complying with IEC 60502 standards.

And also can be produced according to OEM requirements and other standards, such as bs standard, din standard, ASTM standard, etc.

0.6/1KV kV multi-cores / copper conductor / XLPE insulation/copper tape or copper wire screen / galvanized steel wire armored / PVC copper cable or PE sheath power cable.

This cable can be installed in a duct, tray, or direct burial.

It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed so that the safeguarding of persons and the integrity of the product will not be affected by deficiencies in the installation.

The XLPE-insulated power cable has several advantages over paper-insulated and PVC-insulated cables.

XLPE cable has high electric strength, mechanical strength, high-aging resistance, environmental stress resisting antichemical corrosion, and it is a simple construction, using convenient and higher operating of long term temperature.

It can be laid with no drop restriction.

Various flame-retardant and non-flame-retardant XLPE cables can be manufactured with three technology (peroxide, silane, and irradiation cross-linking).

The Flame-Retardant cable covers all kinds of low-smoke low-halogen Low-Smoke Halogen-Free, and non-smoke non-halogenated and three classes A, B, and C.

XLPE lv power cable has a higher long-term working temperature and more excellent current rating, at the same environment XLPE cable may be reduced in size (nominal cross-section) 1 or 2 class in comparison with paper and PVC cable.

This not only improves the quality and properties of products but also reduces cable production costs.

Some of the special XLPE cables can be manufactured according to the other standards required by customs.

International: IEC 60502, IEC 60228, (IEC 60332-3 for FR-type only)

China: GB/T 12706, (GB/T 18380-3 for FR-type only)

Other standards such as BS, DIN, and ICEA upon request

The installation temperature should not be over 20?, If the ambient temperature is lower than 0?, the cable should be preheated.

The bending radius of the cable should not be less than 8 times.

After installation, the cable should withstand a voltage test for 15min. 3.5kv D.C.

Excellent electric and mechanical characteristics

Simple in structure, Convenient to use

Reduce costs

We are capable of meeting the most strict delivery schedules according to purchase orders.

Meeting the deadline is always the top priority as any delay in the delivery of cable can contribute to overall project delay and cost overrun.

The cable is supplied in wooden reels, corrugated boxes, and coils.

Cable ends are sealed with BOPP self-adhesive tape and non-hygroscopic sealing caps to protect the cable ends from moisture.

The required marking shall be printed with a weather-proof material on the outsides of the drum according to the customer`s requirement.

Max. working; temperature: 70 °c for PVC; insulation and 90 °c for XLPE insulation
Max. temperature:
160°c (PVC; insulation), 250°c (XLPE insulation)
Conductor: class 1 and 2 copper
The shape of the conductor: circular and sectional
The shape of the conductor: circular and sectional
Sectional area: 1.5 - 500mm2
Insulation: PVC / XLPE
No. of cores: 1,2,3,4,5,6
Armour: steel wire or steel tape is available
Sheath: PVC
Filler: Polypropylene lament with lapped binding tape
Core-covering: Binding tape
Min. bending radius: 15 times cable radius (single-core), 12 times cable radius (multi-cores)