- Home
- Companies
- CATCO Catalytic Heater Company
- Services
- Installation Services
Installation Services
All Catco catalytic heaters include an instruction manual with specific steps for installation. Catco products are intended for industrial use only and should only be installed and operated by professionals with appropriate training in gas, electrical, and general personnel safety. If at any time you need guidance on how to safely install or operate Catco products, please contact your Catco distributor or our factory at 972-563-8065.
Installation is limited to connecting to a suitable gas supply. Heaters may be started using either DC or AC power, making them ideal heating sources for remote locations where electrical power is limited or not available. For natural gas fired heaters, fuel gas is usually readily available on site. It’s critical the unit be installed so the face of the heater is protected from rain and snow.
Installation must conform with local building codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54 or the Natural Gas and Propane Installation Code, CSA B149.1. When installing a Catco heater in a hazardous location such as a Class I, Division 1 or Division 2, Group D area, ensure that all associated electrical equipment is appropriately rated for the area where it will be installed.