Solar Thermal Collectors Equipment For Solar Energy
-
Manufactured by Unique Solar Systembased in INDIA
Solar water heating is the conversion of sunlight into heat for water heating using a solar thermal collector. A variety of configurations is available at varying cost to provide solutions in different climates and latitudes. SWHs are widely used for residential and some industrial ...
-
Manufactured by Sunerg Solar Energy S.R.L.based in ITALY
Flat solar collector BLUh+/BLUhx+ Sunerg model EN 12975, CE, Solar Keymark, KIWA certificated and with following characteristics: gray painted aluminum section case with 45 mm rock wool thermal insulation. Solar plate with 22 mm diameter pipes absorber plate with highly selective titanium treatment and laser welding. Low iron, tempered ...
-
Manufactured by Kemal Paralik Metal Isleri Ltd.based in TURKEY
Dimensions: 97 cm X 198 cm X 8 cm. Glass: 4 mm Prismatic. Internal Structure: 12 Aluminium Tubes. Gross Surface: 2.00 m2. Weight: 41 kg.. Operating Pressure: Max 3 Bars. Trial Pressure: 5 Bars. External Case: Embossed Sheet. Insulation: Glasswool. Absorber Liquid Capacity: 6.0 lt. Ø Inlet / Outlet: ...
-
Manufactured by Solimpeksbased in TURKEY
Almeco - Tinox highly selective aluminum. Rock wool insulation. Copper pipe. Ultrasonic welding. Low iron tempered glass. Horizontal System. 10 years ...
-
Manufactured by Kemal Paralik Metal Isleri Ltd.based in TURKEY
Dimensions: 93 cm X 173 cm X 8 cm. Glass: 4mm Prismatic. Internal Structure: 8 galvanized flowing tubes. Gross Surface: 1.60m2. Weight: 46 kg.. Operating Pressure: Max 4 Bars. Trial Pressure: 6 Bars. External Case: Galvanized Sheet with Electrostatic Powder Paint. Insulation: Glasswool. Absorber Liquid Capacity: 3.9 lt. Ø Inlet / Outlet: ...
-
Manufactured by Sunerg Solar Energy S.R.L.based in ITALY
Evacuated tube collector with U-pipe technology. It is composed by 12 glass tubes, which have inside a U shaped copper tube on an aluminum fin in order to convert solar energy in thermal energy. The absorber surface area is bigger than the gross surface area because of a CPC reflector (Compound Parabolic Concentrator), which optimizes the direct and diffuse radiation from morning to evening. This ...
-
Manufactured by F.D.E. Solar Srlbased in ITALY
Vertical thermal solar collector 2.1 m2. The thermic solar collector FDE 2.1/FDE2.6AV/FDE2.1MV/FDE2.6MV with selective flatbed has a high absorbing surface area , a high efficiency and a modern design . Suitable for all applications in the field of solar thermal systems, it is adaptable to different surfaces, either flat or pitched roof , while also allowing the installation on the facade ...
-
Manufactured by Solimpeksbased in TURKEY
Solimpeks Wunder CLS Meander at a glance. Almeco – Tinox highly selective aluminum. Rock wool insulation. Copper pipe. Ultrasonic welding. Low iron tempered glass. Meander System. 10 years warranty. ...
-
Manufactured by Smit Thermal Solutions B.V.based in NETHERLANDS
Smit Thermal Solutions specializes in Closed Space Sublimation (CSS), a form of Physical Vacuum Deposition (PVD) technology used to deposit thin films on a substrate. This technique involves heating a crucible containing the source material, causing it to vaporize and condense onto the substrate located in close proximity, typically a few millimetres ...
-
Manufactured by Lion Alternative Energy PLCbased in UNITED KINGDOM
Lion Alternative Energy Plc (Lion) has developed a number of technologies which combined will allow the low cost production of energy from renewable ...
-
by TIGIbased in ISRAEL
TIGI’s Honeycomb Collector is the revolutionary, new and most cost effective type of solar thermal collector available for demanding applications. It is highly efficient and cost effective, outperforming all other available collectors particularly in high temperature differential applications like space heating, industrial process heat, domestic hot water in cold climates as well as space ...
-
Distributed by SunChiller Incbased in USA
Radiant floor heating, wall-side radiators and heating fan coils can utilize solar thermal energy harvested by SunChiller solar thermal collectors. The existing conventional hot water system can remain and serve as an auxiliary/backup to the solar thermal ...
-
Manufactured by Energie Energia Solar Termodinâmicabased in PORTUGAL
Probably the most developed solar water heater in the world. Available with capacities of 200 to 500 litres. Versions with one or two solar panels, with or without supplementary coil. Cylinder available in enamelled or stainless ...
-
Manufactured by Energie Energia Solar Termodinâmicabased in PORTUGAL
Probably the most developed solar water heater in the world. Available with capacities of 100 to 300 litres. Versions with one solar panel. With or without supplementary coil. Cylinder available in stainless ...
-
Manufactured by Invent Srlbased in ITALY
The “solar thermal” combines two environmentally friendly technologies: the heat pump and the solar thermal collector. Thanks to the physical pattern identical to the one of a normal solar thermal system and to heat pump components, solar thermodynamic represents the new technology frontier for heating water (up to 60 ° C), saving up to 85% from traditional systems, in an ...
-
Manufactured by Atlantis Solarbased in USA
Atlantis Solar provides high quality copper tube, aluminum framed flat plate thermal solar collectors, and rack systems. You are guaranteed 100% durability with high quality thermal solar energy. The special module installation system is easy to mount on both flat and sloped roof, realizing the perfect integration between buildings and collectors, also meeting the demand of heat ...
-
Manufactured by Solimpeksbased in TURKEY
Solar Keymark certified. Almeco – Tinox highly selective copper. Rock wool insulation. Copper pipe. Ultrasonic welding. Low iron tempered glass. 10 years ...
-
Manufactured by ViaSolisbased in LITHUANIA
To make the installation process of solar panels to the roof simple and easy, ViaSolis suggests ViaSolis SOLRIF Glass/Glass in-roof system for 60 cells modules. Unlike on-roof systems, this roof integrated mounting system is a true alternative to conventional roof covers. The Solrif® mounting system is suited for various roof types. It can be used in complete or partial photovoltaic roofing, ...
-
Manufactured by SOLID Solar Energy Systems GmbHbased in AUSTRIA
Solar District Heating feeds heat from solar thermal collectors into existing or new district heating grids. Solar district heating solutions were already implemented from small villages up to cities with several hundred thousand inhabitants. Innovative concepts of SOLID include storage and load management, yielding the highest solar fraction and lowest energy ...
-
Manufactured by Kemal Paralik Metal Isleri Ltd.based in TURKEY
Dimensions: 100 cm X 200 cm X 9 cm. Glass: 4mm tempered. Internal Structure: Blue coated aluminium selective surface. Internal Serpentine Structure: 22 mm manifold - 8 mm flow copper tube. Gross Surface: 2.00m2. Weight: 40 kg.. Operating Pressure: Max 4 Bars. Trial Pressure: 20 Bars. External Case: Aluminium frame. Insulation: Mineralwool plate. Absorber Liquid Capacity: 1.6 lt. Ø Inlet / ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you