Introducing Setra`s Power Patrol Meter Video
The Setra Power Patrol is every electrical contractor's dream. The
networked 3-phase power meter works with Rogowski Coils and
standard CT's and has a small enough form factor to be mounted inside or outside of the panel using either mounting tabs or the DINrail clip making it the easiest installation in the industry.
Rogowski and CT Compatible
The Power Patrol works with either Rogowski Coil “flex”
CTs or conventional split-core CTs. The ability to have interchangeable CTs gives added flexibility for last minute changes at the job site. The Power Patrol is embedded with the necessary amplifier/integrator circuitry for Rogowski coil CTs—eliminating the need to provide external power.
Easy USB Configuration
Using the Power Patrol HeadStart software, power and configure
the meter through your computer's USB port. While
other meter's require configuration in a live enclosure, the
Power Patrol can be easily configured outside of the panel,
eliminating the risk of arc flash. HeadStart can save meter
settings, allowing the installer to clone meter profiles
quickly and easily.
Line Powered from 80-600V
The Power Patrol series instruments are line-powered and
do not require external power. Its power supply can accommodate
service voltages ranging from 80-600V (phase-tophase).
The Power Patrol has 3 LED indicators (Red/Green)
which confirm proper CT-to-phase installation.
Field Selectable Communications (4-in-1)
Each Power Patrol comes with a field selectable Modbus or
BACnet communication. Communications interface to the
Power Patrol is through either an RS-485 serial connection
(BACnet MS/TP / Modbus) or over Ethernet (BACnet IP /
Modbus TCP).
networked 3-phase power meter works with Rogowski Coils and
standard CT's and has a small enough form factor to be mounted inside or outside of the panel using either mounting tabs or the DINrail clip making it the easiest installation in the industry.
Rogowski and CT Compatible
The Power Patrol works with either Rogowski Coil “flex”
CTs or conventional split-core CTs. The ability to have interchangeable CTs gives added flexibility for last minute changes at the job site. The Power Patrol is embedded with the necessary amplifier/integrator circuitry for Rogowski coil CTs—eliminating the need to provide external power.
Easy USB Configuration
Using the Power Patrol HeadStart software, power and configure
the meter through your computer's USB port. While
other meter's require configuration in a live enclosure, the
Power Patrol can be easily configured outside of the panel,
eliminating the risk of arc flash. HeadStart can save meter
settings, allowing the installer to clone meter profiles
quickly and easily.
Line Powered from 80-600V
The Power Patrol series instruments are line-powered and
do not require external power. Its power supply can accommodate
service voltages ranging from 80-600V (phase-tophase).
The Power Patrol has 3 LED indicators (Red/Green)
which confirm proper CT-to-phase installation.
Field Selectable Communications (4-in-1)
Each Power Patrol comes with a field selectable Modbus or
BACnet communication. Communications interface to the
Power Patrol is through either an RS-485 serial connection
(BACnet MS/TP / Modbus) or over Ethernet (BACnet IP /
Modbus TCP).
-
Most popular related searches
Customer comments
No comments were found for Introducing Setra`s Power Patrol Meter Video. Be the first to comment!