New Generation network analyzer NG-9 Video
NG-9
The world smallest analyzer featuring 9 channels within 9 cm, why not reduce installing time and costs by a third and multiply performances by 3?
- Flexibility: The special probe with range from 1 to 2000 A offers the most versatile solution available on the market
- Accuracy: 0.5 class instrument which guarantees accuracy on the whole measurement system
- Measurements: 160 electric parameters displayed on LCD and on your own device via RTU-Modbus
- Versatility: High suitability thanks to the combination of split current transformer and/or Rogowski coil for single-phase, three-phase or shuffled mode
- Simplicity: The time and costs are reduced by 85%, no shutdowns
It does not exist anything like our NG-9 to compare to.
- No plant shutdowns
- Modbus RTU communication speed 3 times faster than other analyzers: 115200 baud rate
- Possibility of using all range of Rogowski Coils or Split Current Sensors on each instrument on either single, three or mixed phase mode
- Easily fits in pre-existing panels
- Connection to 1 voltmeter instead of 3
- Extensions allow up to 10 m distance from the device
- Reduced installation errors to allow a simple and correct start up
- Each current sensor can be connected to the device with a one-way electrical connector without using additional cables, scissors and screwdrivers
- Power consumption 12 times less than any other device on the market. i.e. : NG-9 €21/10 years, other devices €252/10years
- NG software set up that permits simple and fast programming
- NG-9 has many different fields of application: office buildings, wharehouses, retail centres, small and large factories. It is particularly suitable for data centres' energy cost distribution
The world smallest analyzer featuring 9 channels within 9 cm, why not reduce installing time and costs by a third and multiply performances by 3?
- Flexibility: The special probe with range from 1 to 2000 A offers the most versatile solution available on the market
- Accuracy: 0.5 class instrument which guarantees accuracy on the whole measurement system
- Measurements: 160 electric parameters displayed on LCD and on your own device via RTU-Modbus
- Versatility: High suitability thanks to the combination of split current transformer and/or Rogowski coil for single-phase, three-phase or shuffled mode
- Simplicity: The time and costs are reduced by 85%, no shutdowns
It does not exist anything like our NG-9 to compare to.
- No plant shutdowns
- Modbus RTU communication speed 3 times faster than other analyzers: 115200 baud rate
- Possibility of using all range of Rogowski Coils or Split Current Sensors on each instrument on either single, three or mixed phase mode
- Easily fits in pre-existing panels
- Connection to 1 voltmeter instead of 3
- Extensions allow up to 10 m distance from the device
- Reduced installation errors to allow a simple and correct start up
- Each current sensor can be connected to the device with a one-way electrical connector without using additional cables, scissors and screwdrivers
- Power consumption 12 times less than any other device on the market. i.e. : NG-9 €21/10 years, other devices €252/10years
- NG software set up that permits simple and fast programming
- NG-9 has many different fields of application: office buildings, wharehouses, retail centres, small and large factories. It is particularly suitable for data centres' energy cost distribution
Customer comments
No comments were found for New Generation network analyzer NG-9 Video. Be the first to comment!