Energy
Apart from the consumed kW, the current values of electricity, voltage, power, power factor of AC voltage in the network are measured as well

Gas, water, heat
Pulse devices are integrated with a great number of resource meters by other manufacturers, which are equipped with a pulse output

Green energy
Monitoring the generation of solar energy and others generated from the renewable sources, notification about the case of a change in the direction of energy

Temperature
Measurement temperature at five points, connecting up to five 1-Wire digital sensors DS18b20

Humidity
Relative humidity and temperature measurement with the DHT22 universal sensor

Pressure
Connection of any analog pressure sensors for water, gas, air to a universal impulse meter

Carbon dioxide CO2
Monitoring of Carbon dioxide CO2 and automatic activation of ventilation when exceeding the permissible level

Wind
Connection the sensors for measuring wind speed and wind direction to the universal device D105

Radiation
General background gamma-ray radiation in real-time and always at hand, online dosimeter of own design

TDS and pH
Measurement of TDS Salt Levels and total pH Acidity Level in water treatment systems, aquariums, pools

Accuracy
All devices provide high accuracy of measurements with an error of up to 0.5%, which meets the standards of household meters

Production control
Control over the excess of the allowable power generation with the possibility of including "ballast" consumers, such as a boiler

Connection
To communicate with the cloud server and the client, the devices use a Wi-Fi connection, the IEEE 802.11 b/g/n protocol, or cellular

Configuration
After being turned on, the device is available as a Wi-Fi access point, the initial setting is available from any smartphone and takes a few minutes

Load management
Switching relay for turning on or off the external load, is controlled from Dashboard, the device WEB page, via MQTT and API interfaces

MQTT Client
The MQTT client supports third-party MQTT servers. Management of the external load is available by the corresponding subscription

API interface
The open API interface is based on REST requests, the device can be easily integrated with various data accounting and visualization systems

Stand-alone
All devices are equipped with a backup memory capable of storing captured data up to 30 days in case of the unavailable communication to the server

smart-MAIC Dosimeter-Radiometer Sensor DR-20 - Video