Waste Heat To Power Equipment For Waste-To-Energy
-
Manufactured by Zhengzhou Boiler Co., Ltd. (ZBG)based in CHINA
Product Category : Steam Boiler Type: Q Capacity: 1~35t/h Pressure: 1.25~2.25Mpa Temperature: 184~350℃ Overview: In the process of steel production, the sintering process takes up 10% of total energy consumption, and nearly 50% heat in sintering flue gas and cooler waste gas is exhausted to atmosphere. While sinter cooler waste heat boiler takes use of that waste heat to generate power, ...
-
Manufactured by ElectraTherm by Bitzer Groupbased in USA
This low temperature, waste heat recovery unit is ideal for heat sources above 70C. A simple and robust design along with proprietary technologies give the ElectraTherm ORC system the lowest heat requirements in its class while still achieving high efficiencies through inconsistencies in the heat source. This makes ElectraTherm's systems ideal for small-scale applications or those with varying ...
-
Manufactured by OnPower, Incbased in USA
OnPower, Inc.’s Power Generation Packages incorporate the Siemens SGT-A05 family of Aeroderivative Industrial Gas Turbines, previously the Rolls-Royce Industrial 501-K. The more than 2,500 SGT-A05 Series industrial gas turbines installed around the world under Rolls-Royce and Siemens have accumulated over 65 million operating hours. This experience further demonstrates the dependability ...
-
Manufactured by Ormat Technologies, Inc.based in USA
Ormat's Recovered Energy Generation (REG) solutions complement cement plant operations and generate cost-effective electricity from unused waste heat. Even in optimized cement plants, some heat is lost, either from exhaust gases, clinker coolers or both. Ormat's REG solutions capture the residual heat and use it to generate clean, efficient electricity with no additional ...
-
Manufactured by Energent Corporationbased in USA
The Variable Phase cycle is a patented power system that generates power from waste heat and geothermal resources. The Variable Phase Turbine enables an efficient system for waste heat recovery and geothermal power ...
-
Manufactured by Questor Technology Inc.based in CANADA
ClearPower Systems by Questor specializes in the design and installation of Organic Rankine Cycle (ORC) power generators. Electrical power is generated from waste heat. Our systems are designed to efficiently transform otherwise wasted high and low-temperature heat into valuable electricity power which can be used on site, or transferred to a power grid. The result is an overall system ...
-
Manufactured by Solex Thermal Sciencebased in CANADA
Unlike conventional drying and conditioning technologies which blow hot air through the product as both the heat source and the way of removing moisture; Solex uses a combination of advanced plate heat exchange technology to provide the heat source and independent sweep air to remove the moisture. This approach greatly reduces air-flow requirements, returning much better efficiencies and improved ...
-
Manufactured by Burmeister & Wain Scandinavian Contractor A/S (BWSC)based in DENMARK
Based on our extensive experience and industry network, BWSC offers a broad range of up-grade, lifetime extension and rehabilitation measures on part or full turnkey basis, such ...
-
Manufactured by Spilling Energie Systeme GmbHbased in GERMANY
From the single-stage, overhung turbine to the efficiency-optimised multi-stage, tandem type turbo set – Spilling steam turbines are suited to the most varied customer requirements and applications. The wide-ranging product line is geared to the decentral generation of energy and enables a wide range of applications in driving power ranges between 300 to 5,000 kW. At the focus are ...
-
based in USA
CHP is a form of energy recycling that recovers heat that’s normally wasted when generating power to supply the heating or cooling needs of an end user. CHP, also called cogeneration, is the simultaneous production of electrical and thermal energy from a single fuel source. CHP systems are a group of distributed generation technologies capable of capturing heat that would otherwise be ...
-
Manufactured by Dutch Incinerators BVbased in NETHERLANDS
Electrical power generation by an Organic Rankine Cycle (ORC). An ORC converts recovered waste heat to combined heat and power (CHP), where steam based energy recovery is not practically feasible, specifically for energy recovery at lower flue gas temperatures and smaller thermal input capacities. Power generation by a steam turbine, specifically for energy recovery at higher flue gas ...
-
Manufactured by INTEC GMK GmbHbased in GERMANY
INDUCAL-„industrial caloric" describes our organic rankine cycle-waste heat recovery product line that makes it possible to recover waste heat efficiently from industrial plants, such as glass and steel mills or big engines for the generation of electricity. The primarily named waste heat sources nowadays are mainly not recovered since most of the time they are only available on low ...
-
based in UNITED KINGDOM
Worldwide there is an estimated 40,000GWhe of energy lost from steam systems. The Heliex Steam expander provides a method to recover some of these ...
-
by EcoGenR8 Ltdbased in UNITED KINGDOM
Our waste heat solution will convert even low grade heat – whether liquid, steam or gas – into green ...
-
Manufactured by Therminol | Eastman Chemical Companybased in USA
Therminol 62 is a synthetic heat transfer fluid whose chemistry is custom contoured for high-performance, high-purity, low-pressure and exceptional thermal ...
-
Manufactured by Zudek s.r.l.based in ITALY
Albert Einstein presented in 1930 for the first time a no-moving-parts absorption refrigerator that required only a heat source to operate. More than sixty years later, we at Zudek embraced and developed this refrigeration system, using a water and ammonia solution (ammonium hydrate), making it one of our strengths. Enermatik is an ammonia absorption chiller that generates refrigeration power ...
-
based in CANADA
Generating electricity and cooling from low potential waste heat is the biggest sleeping giant of the worldwide energy market and will significantly transform the energy system globally. ...
-
Manufactured by Frontline Wastebased in USA
A mobile Organic Rankine Cycle (ORC) power generator by a 3rd party, leader in small-scale heat-to-power generation, specially adapted to work in conjunction with the Gen-H. The Gen-E converts the heat from the waste recovery process into zero-carbon electricity. One Gen-H powers two ...
-
Manufactured by Infratech Corporationbased in CANADA
Infratech’s combustion group offers solid & liquid waste incineration packages, suitable for reducing any type of solid or biomedical waste. We will work with you towards standard configuration models or custom designs according to your waste characteristics and any specific client requirements or ...
-
Manufactured by Infratech Corporationbased in CANADA
Reduction Capacity:* From 175 kg/hr [385 lbs/hr] to 300 kg/hr [660 lbs/hr]. Shipping Dimensions: 7,010 [23’–0”] long x 2,743 [9’–0”] wide x 3,883 [12’–8 7/8”] high (stack shipped separately). Weight: 19 000 kg [41 800 lbs]. Approximate Diesel Fuel Usage: 25.0 – 40.0 L/hr [6.0 – 10.6 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you