- Home
- Applications
- oil refiner
Refine by
Oil Refiner Product Applications
12 applications found
PROCESS INFORMATION: The Vacuum Unit is fed with Crude Bottoms and is injected with steam. Passing upwards through wash oil stages, the gas exits to an overhead condenser, where cleaned gas goes to LT Ends, and Naphtha and Light Cycle Oil are produced as liquids. From side streams the Vacuum Unit sends HVGO to the FCC Fractionator and LVGO to the Hydrocracker or for ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
PROCESS INFORMATION: In (UOP) Merox Units, where crudes are acidic, Caustic is used to reduce H2S traces and the Mercaptan Sulphur content. Caustic Treating Systems are done with a Pre-Washer followed by a Reactor vessel. The mixture is then fed to a liquid-liquid separator to remove the water and caustic from the ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
From food & beverage to pulp & paper to oil refining, plate & frame heat exchangers have versatile industrial ...
ByPlate Concepts, Inc. based in Lebanon, NEW JERSEY (USA)
PROCESS INFORMATION: The Fractionator is fed from the reactor and side strippers are injected with steam. Naphtha and Light Cycle Oil are produced. In a Pipestill, fed from a crude furnace, the side strippers produce Jet A, Gas Oil and Diesel or Heavy Gas ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
With a heritage in steam dating back to 1868, Skinner has earned a solid reputation in building single stage steam turbines up to 3000 horse power and steam turbine generator packages up to 2MW for clients within the Oil Refining ...
BySkinner Power Systems based in Erie, PENNSYLVANIA (USA)
PROCESS INFORMATION: The Amine gas treating, also known as gas sweetening, refers to a process that uses aqueous solutions of various alkylamines (commonly known as amines) to remove hydrogen sulphide (H2S) and carbon dioxide (CO2) from gases. Aqueous solutions of MEA (monoethanolamine) are used as a gas stream scrubbing liquid in amine treaters to remove H2S from sour natural gas. The MEA reacts with acidic compounds dissolved in the solution, using a large surface area to contact with the cold scrubbing solution ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
PROCESS INFORMATION: The Naptha Hydrotreater prepares feedstock for downstream reforming or isomerization. The naphtha feed is mixed with hydrogen rich recycle gas. The mixed feed is then heated and then fed to the reactor, which contains a cobalt-molybdenum or nickel-molybdenum catalyst to convert contaminants such as sulphur, nitrogen, oxygenates and halides to hydrogen sulphide, ammonia, water and hydrogen halides. These can then be removed from the hydrocarbon stream. ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
Premium
Introduction One of the most widespread liquid electrical insulating materials is transformer oil. It is used to fill the pores in the fiber insulation and the space between the windings, thereby increasing the dielectric strength of the insulation and improving the heat removal from the windings and the core of a ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Since 1975, the demand for hydrogen used in industrial purposes has increased more than threefold, and the global demand continues to ...
ByNorwegian Hydrogen AS based in Ålesund, NORWAY
ITM Power can provide a clean, on-site hydrogen supply which will decarbonise the refining process and reduce emissions. Refinery’s use vast quantities of hydrogen in the de-sulfurization of crude oil to make petrol and diesel. Recently with the demand of diesel increasing, this has led to a demand increase for hydrogen, as diesel requires more refining than petrol. Currently hydrogen used in this process is made via steam methane reformation (SMR) which ...
ByITM Power based in Sheffield, UNITED KINGDOM
Turboden Organic Rankine Cycle (ORC) units enable power production (up to 20 MW per single turbine) by recovering excess waste heat from the exhausts of gas turbines or reciprocating engines, or from the hot streams typical in Oil & Gas industry. ORC turbogenerators provide a solution to improving the efficiency of typical Oil & Gas processes, by allowing users to reduce their environmental footprint through converting waste, high-to-low grade heat, into mechanical/electric ...
ByTurboden S.p.A based in Brescia, ITALY
Gooch Thermal spiral heat exchangers are superior to conventional heat exchangers for difficult heat transfer services involving fouling process fluids and high solids slurries, whether present on one side or on both sides. As column-mounted condensers, our spiral heat exchanger is an elegant solution for condensing of column overhead vapors under vacuum with practically nil pressure drop and compact ...
ByGooch Thermal Systemsm, Inc based in Whitehall, PENNSYLVANIA (USA)