- Home
- Applications
- thermal energy storage systems
Refine by
Thermal Energy Storage Systems Product Applications
5 applications found
Usually gas engine work in a Virtual Power Plant system. It means that the electricity generation is more important than the heat generation, so the heat generation is fluctuating and it is different in time than the needs of the heat.Besides, that the biggest problem with gas engines is that after they stop there is a huge amount of heat still in the overheated material of the engine (latent heat) and usually it can not be used because of the water temperature would be too ...
ByHeatVentors based in Mezőtúr, HUNGARY
It is always more efficient to produce energy in a concentrated place, like district heating and cooling systems.In case of the district heating systems a thermal energy storage is essential. The well-known solution is the water storage. However, it requires a lot of space.The number of district cooling systems (DCS) is rapidly increasing but they have many technical challenges: peak load ...
ByHeatVentors based in Mezőtúr, HUNGARY
A 2.9MW cooling and heating aquifer thermal energy storage system for five mixed-use buildings including over 200 luxury ...
ByBoode Waterwell Systems based in Zevenhuizen, NETHERLANDS
There are many problems concerning cooling systems. Cooling systems work with changing efficiency during a day. There are growing cooling needs due to the increasing outside temperature. Electricity prices will increase because the artificial price is not sustainable anymore. The systems are oversized, they work with bad (low, weak - ezek jobban néznének ki, nem tudom, hogy szakmailag megállja-e a helyét valamelyik) efficiency far from the design point and they turn on and off quite ...
ByHeatVentors based in Mezőtúr, HUNGARY
Data centers/telecommunication sites need to be cooled 24/7. They optimally operate at 24-28 ⁰C. They are cooled similarly to industrial air conditioning using electrical energy. Unfortunately, the system is the least energy efficient when the temperature difference is the highest (i.e. the outside temperature is too high). However, at night, when the temperature is low outside, the cooling system is more efficient or not even needed. Also in case of a blackout the cooling systems need 4-6 minutes to ...
ByHeatVentors based in Mezőtúr, HUNGARY