Only show results in USA? Ok

wind power system Applications

  • Weather Monitoring Systems for wind energy sector

    Wind power is now the world`s fastest growing alternative energy source and has also become one of the most rapidly expanding industries. For over 40 years, Climatronics has been a leading developer and manufacturer of wind measurement sensor technology to the growing wind power generation market. We offer precision weather sensors for wind energy applications such as wind resource assessment, wind turbine generator control, and wind farm performance management.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Ammonit Wind Ressource Assessment Systems

    Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems...

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Wind power solutions for the off-grid systems sector

    Off-Grid Systems wind & solar-powered rural electrification hubs for easy deployment in the most remote sites.

    By XANT NV based in Brussels, BELGIUM.

  • Ammonit Wind Resource Assessment in Cold Climates

    For wind resource assessment campaigns in regions with long and cold winters, special measurement systems have to be designed. The challenges of cold climate regions should never be underestimated. Particularly icing is a problem. The met mast construction and the installed sensors have to be chosen carefully. The instruments have to be properly heated by a reliable power system. With our long-term experience in wind measurement and our local installation partners we can offer complete measurement systems robust...

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Photovoltaic power solutions for the wind power case sector

    Photovoltaic power solutions for the wind power case sector.

    By Anhui Leiton Electric Technology Co., Ltd. based in Hefei, CHINA.

  • Meteo and Wind Monitoring Wind Energy Sector

    The Renewable Energy market is expanding rapidly to reduce the dependency on traditionial energy sources and to reduce CO2 emissions in the future. Mierij Meteo offers sensors and system for many applications in the Renewable Energy market. Mierij Meteo supplies wind sensors for wind turbine control, Automatic Weathers Station for forecasting and robust and accurate sensors for research and power curve measurements (MET masts). By using Mierij Meteo sensors and systems you will ensure optimal of your wind turbines....

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS.

  • Power plant

    coal/oil/gas fired, combined cycle, biomass, wind, solar(PV&CSP), geothermal, waste to energy, etc.

    By Runh Power Co.,Ltd based in Qingdao, CHINA.

  • Plate and Angle Roll and Automatic Rolling Systems for Wind Power

    DAVI 4 roll along with our exclusive “High Productivity Package” is the most widely purchased system by top wind tower manufacturers to produce their wind tower cylinders and cones, in semi-automatic mode, in as short as 10-15 minutes only, with one only operator.

    By DAVI - Promau Group based in Cesena, ITALY.

  • Wind power solutions for the microgrids sector

    Microgrids state-of-the-art wind power with integrated storage and full controllability for the smartest of grids.

    By XANT NV based in Brussels, BELGIUM.

  • Glass Fabrics for Wind Energy

    STEKLONiT offers solutions for wind energy, one of the most promising sectors of electric-power industry. Thanks to inherent high quality, physical-mechanical properties, light weight, STEKLONiT’s glass fabrics are used in manufacture blades and tubes of wind power generators. Products can be manufactured according to a customer`s requirements and delivered to any place in the world.

    By Steklonit JSC based in Moscow, RUSSIA.

  • Hydrogen solutions for power-to-gas sector

    In 2012, GP JOULE developed the power gap filler system to compensate for load fluctuations in the grid resulting from variations in the supply of wind and solar energy. PEM electrolysers convert excess green energy into hydrogen, which can be stored and fed back into the grid as required via a biogas-fired block-type thermal power station. This makes it possible to optimally integrate renewable energies into the electrical grid and offset and compensate for a lack of energy on days when there is little wind or...

    By H-Tec Systems GmbH based in Lübeck, GERMANY.

  • Limpet Wind Energy Solutions

    We are working with major turbine OEMs, energy utilities and technical service specialists to reduce operations and maintenance costs and increase availability of wind turbines through the deployment of Limpet safety systems. Key applications for Limpet® systems include:

    By Limpet Technology based in Edinburgh, UNITED KINGDOM.

  • Wind Turbine and Generator

    Stanford Magnets provide high quality neodymium magnets used in large scale in commercial wind turbines to ensure high energy-efficiency and good reliability for the whole generator systems.

    By Stanford Magnets based in Irvine, CALIFORNIA (USA).

  • Fabrication solutions for the wind energy industry

    Modern wind turbines include a variety of components from BRÜCK. Our products are found in the power transmission in the form of bearings, flanges, gear and generator parts as well as in the pitch and gondola housing. Due to our vast depth in manufacturing and the enormous production capacity, we can cover the usual in the wind power industry requirements and high demands in the situation. Many global players in the wind energy sector benefit from BRÜCK proposed solutions for structural design of...

    By BRÜCK GmbH based in Saarbrücken-Ensheim, GERMANY.

  • Premium

    High-tech energy solution for the solar panel manufacturing industry

    The solar panel manufacturing industry includes owners and operators of solar-power-generating facilities in the form of either photovoltaic panels or solar thermal power stations that make use of mirrors or lenses to concentrate the sun`s energy. Operators then sell the energy to downstream customers. These businesses require systems and solutions to meet their photovoltaic panel manufacturing process emissions and pollution control challenges, including volatile organic compound (VOC) abatement; and acid gas...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Wind power solutions for the agriculture industry

    Agriculture harvesting free resources to lower your electricity bill.

    By XANT NV based in Brussels, BELGIUM.

  • Premium

    Gas monitoring for power generation applications

    Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Wind Energy Meteorology

    As the world addresses the challenges of global warming green energy production and in particular wind energy generation has increased significantly. Biral can provide sensors for the control of aviation obstacle light intensity, wind speed measurement and site assessment. The Deutscher Wetterdienst (German Meteorological Service – DWD) has certified the VPF-710, SWS-100 and SWS-200 sensors as suitable for use in visibility controlled wind turbine obstruction light systems.

    By Bristol Industrial & Research Associates Ltd (BIRAL) based in Portishead, UNITED KINGDOM.

  • Industrial and Commercial Solar

    Many businesses today are faced with rising energy costs and declining competitiveness. These are some of the reasons why companies are adopting the sustainable and affordable solution of producing their own renewable energy, selling the surplus electricity back to the grid. In Turkey, businesses can install renewable energy systems with a capacity of up to 1 MW without a license, or can apply for a government license to install systems with capacities above 1 MW. Both licensed and unlicensed projects, located...

    By Eko Renewable Energy Inc. (EkoRE) based in Istanbul, TURKEY.

  • Engineering services for wind energy industry

    We offer expertise in the wind industry with experience at all scales of wind energy from micro turbines to offshore systems. As active members of the industry, we are represented on RenewableUK Standards Groups, IEC technical working groups and MCS working groups, developing standards and certification requirements for the industry.

    By Energy Technology Centre Ltd based in East Kilbride, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you