Applications in Africa

  • Premium

    Compressed air, gas and vacuum solutions for biogas/biomethane

    Customers benefit from the extensive know-how that AERZEN has gained from decades of experience in the chemical and petrochemical industry. The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions.

    By Aerzener Maschinenfabrik GmbH Office in Johannesburg, SOUTH AFRICA.

  • Premium

    Industrial solutions for power and cogeneration industry

    WesTech engineers water and wastewater process solutions for the power industry including water pretreatment, cooling tower makeup water treatment, and ultrafiltration pretreatment to reverse osmosis, guaranteeing SDIs less than 3. ISO 9001:2008 certified and turnkey experienced, WesTech stands ready to meet deadlines and assure minimal downtime with focused service.

    By WesTech Engineering, Inc. Office in Honeydew, Roodepoort, SOUTH AFRICA.

  • Premium

    Humid, corrosive and malodorous waste gases

    CTP's expertise with different coating systems, and an energy-saving pre-heater, protect the installation from corrosion even when waste gases are humid.

  • Premium

    Several waste gas streams: Short, high concentration peaks and a constant |medium concentration

    Concentration peaks and liquid waste posed a tough challenge on the air pollution control system. With the CTP solution, this waste is not only disposed of but also reduces the burner energy considerably.

  • Premium

    Monitoring solutions for the flue gas desulphurisation

    Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much sorbent. In addition, many plants monitor pre and post the FGD to ascertain the efficiency of the plant.

    By Codel International Ltd Distributor in Centurion, SOUTH AFRICA.

  • Premium

    International testing for biofuels

    Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges.

    By Metrohm AG Distributor in Giza, EGYPT.

  • Premium

    Monitoring solutions for the flow combustion efficiency areas

    Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and Crematoriums.

    By Codel International Ltd Distributor in Centurion, SOUTH AFRICA.

  • Premium

    pH value and conductivity measurement for power plants

    Growing populations – about 80 million every year – and industrializing countries create huge needs for electrical energy. According to the International Energy Agency (IEA) the global energy demand will increase by about 65% by 2035. A major fraction of the required energy will continue to be provided by thermal – mainly fossil fuel-fired and nuclear – power plants. "Renewable" energy sources such as photovoltaics (PV) will be another backbone of our energy supply. Putting renewable energy on the grid requires powerful energy storage and conversion devices, such as supercapacitors, batteries, or fuel cells.

    By Metrohm AG Distributor in Giza, EGYPT.

  • Premium

    Portable and fixed gas analysers for agricultural waste AD (large scale)

    Large agricultural processors install AD plant to generate revenue and dispose of biodegradable waste, which is usually a single type.

    By Geotechnical Instruments (UK) Ltd Distributor in Transegbu, NIGERIA.

  • Premium

    Flame ignition for flares

    By AEREON Distributor in Johannesburg, SOUTH AFRICA.

  • Premium

    Fast C1 to C5 - PetroAlert Series 9100

    The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.

    By AMETEK MOCON - Baseline Distributor in Melrose Arch, SOUTH AFRICA.

  • Premium

    Application package FLUXANA Ash

    This application package is a 'ready to go' calibration kit for xrf instruments. Fusion technology is ideal for analysing oxidic materials like ashes. It performs with the highest precision possible in xrf sample preparation. Primarily power stations and their control laboratories have to check the ash from the burning process of black and brown coal. Two standard DIN and ASTM methods describe the testing in detail. FLUXANA is able to deliver both methods ready from the bench. It can for example contain all parts to perform a complete ash analysis: - Calibration set ash prepared from CRM and primary oxides as glass beads - Calibration work performed by FLUXANA expert 3 days on site - 3x drift monitors for xrf instrument - 7x control samples for validation - Flux FLUXANA application packages include always the sample preparation method. If you combine our application packages with our sample preparation machines we guarantee the analytical performance of the package like a contract.

    By Fluxana GmbH Co. KG Distributor in Cairo, EGYPT.

  • Premium

    Machine condition monitoring for power generation

    Power plants are expected to operate 24 hours per day, 7 days per week. Downtime and equipment derating (when a generator fails to deliver power at its rated capacity) can cost a power plant thousands of dollars per hour. The cost of replacing failed equipment is also extremely high. Vibration analysis by itself is not enough to anticipate catastrophic failures. Oil analysis is often able to detect problems at a much earlier stage than vibration analysis. This is why more and more power plants are bringing oil analysis capabilities in house.

    By Spectro Scientific Distributor in Valliquerville, MOROCCO.

  • Premium

    Flow & Energy Management Solutions for HVAC & facility

    Measurement of cold and hot water flows / BTU energy in residential buildings as well as large building complexes such as hospitals, schools, factories and offices to monitor and control usage.

    By Spire Metering Technology Distributor in Octoper City, EGYPT.

  • Premium

    Flow & Energy Management Solutions for chemical industry

    Spire Metering provides non-intrusive measurement solutions for the chemical industry where aggressive and toxic liquids needed to be monitored.

    By Spire Metering Technology Distributor in Octoper City, EGYPT.

  • Premium

    Flow & Energy Management Solutions for vehicle and vessel

    Several Spire Metering Technology flowmeters are excellent for measuring engine fuel consumption and monitoring engine efficiency within Vehicle and Vessel Operation.

    By Spire Metering Technology Distributor in Octoper City, EGYPT.

  • Premium

    Meteorological sensors for solar monitoring

    The most important measurement parameter is irradiation. Since PV systems are becoming ever larger, the accuracy of the irradiation measurement is increasingly important for the efficiency of the system. Wind cools the temperature of the module and must therefore be included in the efficiency calculation. Precipitation leads to contamination or covering (snow). With increasing temperature, the performance of the solar module decreases. Therefore, it is important to measure the temperature of the solar module in addition to the air temperature.

    By G. Lufft Mess- und Regeltechnik GmbH Distributor in Kelvin, SOUTH AFRICA.

  • Premium

    Heat transfer products solutions for the power generation industry

    Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid systems.

    By Evapco Inc. Office in Isando, SOUTH AFRICA.

  • Premium

    Flow & Energy Management Solutions for food and beverage

    For food and beverage processing plants, engaging in blending and batching of foods and drinks where issues of hygiene and contamination are of major concern. Also good for measuring the raw materials used for production.

    By Spire Metering Technology Distributor in Octoper City, EGYPT.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you