Applications in Ontario

  • Premium

    Power Generation

    MEGTEC is actively involved in providing Power Generation solutions for many applications ranging from utilizing process heat recovery systems to utilization with boilers, to recovering and utilizing Ventilation Air Methane (VAM) from coal mines. MEGTEC has developed VAM processing technologies for either abatement only and in combination with energy recovery and utilization. MEGTEC’s proven technologies are destroying methane while generating high quality carbon credits, electricity for coal mines and heating for local communities and facilities.

    By Babcock & Wilcox MEGTEC LLC Office in Waterloo, ONTARIO (CANADA).

  • Premium

    Industrial solutions for power and cogeneration industry

    WesTech engineers water and wastewater process solutions for the power industry including water pretreatment, cooling tower makeup water treatment, and ultrafiltration pretreatment to reverse osmosis, guaranteeing SDIs less than 3. ISO 9001:2008 certified and turnkey experienced, WesTech stands ready to meet deadlines and assure minimal downtime with focused service.

    By WesTech Engineering, Inc. Distributor in ONTARIO (CANADA).

  • Premium

    Compressed air, gas and vacuum solutions for biogas/biomethane

    Customers benefit from the extensive know-how that AERZEN has gained from decades of experience in the chemical and petrochemical industry. The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions.

    By Aerzener Maschinenfabrik GmbH Distributor in Concord, ONTARIO (CANADA).

  • Premium

    Fast C1 to C5 - PetroAlert Series 9100

    The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.

    By AMETEK MOCON - Baseline Distributor in Mississauga, ONTARIO (CANADA).

  • Premium

    Recycling Solutions for dissolving pulp production

    Demands for environmentally friendly fiber sources have dramatically increased the interest in utilizing dissolving pulp, particularly in textile processes. ANDRITZ has a cost-effective approach to dissolving pulp production that includes a new continuous auto-hydrolysis cooking process coupled with efficient washers and other proven downstream pulp processing equipment.

    By ANDRITZ MeWa GmbH Office in Brantford, ONTARIO (CANADA).

  • Premium

    Recycling Solutions for the energy and environment industry

    A comprehensive range of power generation technologies with environmental benefits. ANDRITZ technologies and processes for power generation utilize renewable fuels as well as traditional fossil fuels in efficient and environmentally appealing ways. In addition, there are purely environmental technologies in this category to meet the most stringent standards for emissions and effluent quality. From steam generators and hydropower plants, to air pollution control systems and wastewater treatment equipment, ANDRITZ offers a broad range of products for renewable energies as well as environmental and climate protection.

    By ANDRITZ MeWa GmbH Office in Brantford, ONTARIO (CANADA).

  • Premium

    Sensor for Biogas

    Anaerobic Digestion plants produce various gas components from a source material (or feedstock) that can be composed either solely or as a mixture of slurries, purpose-grown crops, food and organic waste material. The composition of the gas produced varies depending upon the feedstock and the Anaerobic digestion process itself. As a consequence, it is normal to measure various components of the resultant gas produced to evaluate the efficiency of the Anaerobic Digestion process. Furthermore, due to the flammable nature of Methane (CH4), and the risk of asphyxiation, most plants feature ambient air monitoring to protect personnel from any unplanned accumulation of leaked gas. CH4 is the gas component fuel, which is the intended end product of the anaerobic digestion process. In biogas plants, the concentration of CH4 in a working plant varies between 50%-75%, which is well above the Upper Explosive Limit (UEL).

    By Edinburgh Sensors Ltd Distributor in Oakville, ONTARIO (CANADA).

  • Premium

    Gas Sensing for Gasification

    Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high temperature without combustion with controlled amounts of oxygen (O) or steam. The composition of the base material combined with the amount of oxygen and heat used in the process affects the composition of the resultant SynGas, in which the CO can vary between around 20 and 60%. In addition, large amounts of H and CO are also formed. The measurement of CO is therefore an important feature in the production of SynGas.

    By Edinburgh Sensors Ltd Distributor in Oakville, ONTARIO (CANADA).

  • Premium

    Analytical and measuring instruments of energy and chemicals industry

    Energy comprises many types of modes by using complex processes to explore, extract, refine, produce and transport these products. The energy industry comprises: Fossil fuels: coal, petroleum and natural gas (conventional as well as hydraulic fracturing), including liquid propane gas and liquid natural gas. Non fossil fuels such as: hydroelectric, battery technology, hydrogen fuel cells, nuclear power. Renewable fuels such as: biofuels, hydrogen fuel cells, geothermal, solar (photovoltaic). Nuclear power.

    By Shimadzu Scientific Instruments Inc Distributor in Guelph, ONTARIO (CANADA).

  • Premium

    Precision moisture analysis instruments for measuring moisture and ash in biomass

    If you produce or consume biomass fuels, you know that quality is critical to your success, and you know that moisture and ash content control are critical to biomass fuel quality. Too much moisture and you get poor efficience and high emissions. Too much ash and you get fouling and slagging. And if either of those is uncontrolled, purchase contracts can fall through. Computrac can help.

    By Arizona Instrument LLC Distributor in Whitby, ONTARIO (CANADA).

  • Premium

    Actuators for the power generation

    As well as traditional power stations, applications for Rotork products are found on renewable energy generation such as solar thermal plants and on CO2 emissions reduction processes such as flue gas desulphurisation and carbon capture and storage.

    By Rotork Distributor in Lively, ONTARIO (CANADA).

  • Scrap removal for printers, envelope manufacturers, paper converters and box plants

    For over 30 years Kernic has provided North American Printers, Envelope Manufactures, Paper Converters and Box Plants with energy efficient Trim & Scrap Removal Systems. As a designer and manufacture of complete fiber recovery systems, our high-quality equipment and exacting engineering standards deliver OneSource™ solution to your fibre recovery needs.

    By Kernic Systems Inc. based in Burlington, ONTARIO (CANADA).

  • Wood Cogeneration for Rural Communities

    Small rural communities or work camps are ideal applications for the Borealis wood power plant. Its application fit is best when the heat can be used to support a micro-heating-network for 25 homes or fewer in conjunction with a community centre as base load. Power needs must exceed the 45 kWh or it can be sold to the grid.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Agitation and mixing solutions for ethanol / bio diesel

    Ethanol can be produced from a variety of raw materials such as corn, sugar cane, soy beans, switchgrass, corn stover, and cellulosic materials.   Corn can be processed in a dry or wet mill to produce ethanol.  Advances and research in ethanol continues to find new and more energy efficient ways to produce ethanol and biofuels and new raw materials for production.

    By National Oilwell Varco Office in ONTARIO (CANADA).

  • Wood Cogeneration for Farms

    Farming operations that require heat also benefit from the CHP system. The return on investment will vary dependent on whether there is low or no cost access to wood chips and whether the 45 kWh of power can be fully utilized on site or, if not, what rate the power can be sold to the grid.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Investment services for electric power & natural gas industry

    We serve incumbents and new entrants in this rapidly expanding and liberalized sector. We help clients with issues related to organization, operations, and strategy. Our capabilities include organizational restructuring, building capabilities, and top-team management as well as capital investment, cost reductions, performance improvement, networks, and logistics. We also provide strategic direction on mission, sales, economics, and procurement.

    By McHewel Investment Group based in Toronto, ONTARIO (CANADA).

  • Agitation and mixing solutions for bio technology

    The Biotechnology market is ever changing and on the leading edge of technology changes.  New products are continuously under development and agitation and mixing is used throughout the process.   A process may require any or a combination of the following:  blending, solids handling including incorporation/dissolving/suspension, mass transfer, and solids and heat transfer.   The scale for Biotechnology reactors and support units range from a few liters to several cubic meters and from small laboratory units to large scale fermenters.   Biotechnology applications also require vendors who have strong R&D departments and laboratory facilities, polished and aseptic designs, easy drainability and cleanability designs, material validation, quality control programs specific to the project, and are able to meet governing specifications and directives such as FDA, USP, ASME-BPE, and cGMP requirements.

    By National Oilwell Varco Office in ONTARIO (CANADA).

  • Wood Cogeneration for Greenhouses

    Greenhouse operations have been early adopters of the CHP system given their operation’s need for heat. The return on investment is dependent on the regional rate for selling the power to the grid and also the utilities saved from CHP heat.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Solar Energy Solutions

    The promise of solar power is critically important to solving today’s energy demands in an environmentally sensitive way. Gratton develops, design, and delivers the most reliable and cost-effective solar energy solutions. We carry everything you need for your renewable energy project. As technology in the renewable energy industry is dynamic, we are constantly evaluating new products and manufacturers to offer the best package to the environmentally and energy conscious public. Solar system clearly makes environmental sense by producing non-polluting, free, renewable energy. Gratton solar solutions include utility-scale Commercial, Residential, Industrial, Public, and Special solutions to address contemporary energy needs.

    By Gratton Arabia Ltd. based in Mississauga, ONTARIO (CANADA).

  • Biogas monitoring

    meet governmental regulations, it is important to accurately monitor methane gas production, removal, venting, and burning. Knowledge of both methane flow and temperature at the flare stack can define when CH4 is being emitted to the atmosphere. The DX99 FlexPower™ Nodes can be installed in EX area with a Zone 0 ATEX certification. Use the analogue input to determine methane production levels and flow and use the thermocouple model to measure the temperature of a vent to verify the continuous combustion of methane.

    By Banner Engineering Corp. Distributor in Toronto, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you