Applications in Thailand

  • Premium

    Industrial energy and heat recovery solutions

    Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities regard energy consumption. Process equipment and air pollution control systems installed several years ago may not reflect the new energy conscious designs available today. We recommend analyzing these systems periodically to determine energy reduction opportunities. Recovering waste heat is one of the easiest and most utilized means of reducing energy demands at industrial facilities.

    By Anguil Environmental Systems, Inc. Distributor in Rayong, THAILAND.

  • Premium

    International testing for biofuels

    Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges.

    By Metrohm AG Distributor in Bangkok, THAILAND.

  • Premium

    Portable and fixed gas analysers for agricultural waste AD (large scale)

    Large agricultural processors install AD plant to generate revenue and dispose of biodegradable waste, which is usually a single type.

    By Geotechnical Instruments (UK) Ltd Distributor in THAILAND.

  • Premium

    pH value and conductivity measurement for power plants

    Growing populations – about 80 million every year – and industrializing countries create huge needs for electrical energy. According to the International Energy Agency (IEA) the global energy demand will increase by about 65% by 2035. A major fraction of the required energy will continue to be provided by thermal – mainly fossil fuel-fired and nuclear – power plants. "Renewable" energy sources such as photovoltaics (PV) will be another backbone of our energy supply. Putting renewable energy on the grid requires powerful energy storage and conversion devices, such as supercapacitors, batteries, or fuel cells.

    By Metrohm AG Distributor in Bangkok, THAILAND.

  • Premium

    Fast C1 to C5 - PetroAlert Series 9100

    The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.

    By AMETEK MOCON - Baseline Distributor in Bangkok, THAILAND.

  • Premium

    Flame ignition for flares

    By AEREON Distributor in Bangkok, THAILAND.

  • Premium

    Machine condition monitoring for power generation

    Power plants are expected to operate 24 hours per day, 7 days per week. Downtime and equipment derating (when a generator fails to deliver power at its rated capacity) can cost a power plant thousands of dollars per hour. The cost of replacing failed equipment is also extremely high. Vibration analysis by itself is not enough to anticipate catastrophic failures. Oil analysis is often able to detect problems at a much earlier stage than vibration analysis. This is why more and more power plants are bringing oil analysis capabilities in house.

    By Spectro Scientific Distributor in Bangkok, THAILAND.

  • Premium

    Meteorological sensors for solar monitoring

    The most important measurement parameter is irradiation. Since PV systems are becoming ever larger, the accuracy of the irradiation measurement is increasingly important for the efficiency of the system. Wind cools the temperature of the module and must therefore be included in the efficiency calculation. Precipitation leads to contamination or covering (snow). With increasing temperature, the performance of the solar module decreases. Therefore, it is important to measure the temperature of the solar module in addition to the air temperature.

    By G. Lufft Mess- und Regeltechnik GmbH Distributor in Bangkok, THAILAND.

  • Premium

    Precision moisture analysis instruments for measuring moisture and ash in biomass

    If you produce or consume biomass fuels, you know that quality is critical to your success, and you know that moisture and ash content control are critical to biomass fuel quality. Too much moisture and you get poor efficience and high emissions. Too much ash and you get fouling and slagging. And if either of those is uncontrolled, purchase contracts can fall through. Computrac can help.

    By Arizona Instrument LLC Distributor in Chonburi, THAILAND.

  • Premium

    Measuring the Biofuel Blend Ratio in Gasoline and Diesel Fuels

    As more mandates for a minimum of ethanol in gasoline and biodiesel in diesel come into effect, major oil companies are blending higher percentages of biofuels at their terminals. A quick analytical measurement method to assess the blend ratio can be a valuable asset for fuel distributors, engine manufacturers, fleet operators, and regulatory agencies. The InfraCal Biodiesel and Ethanol Blend Analyzers offer a quick way to verify that fuel blends are on spec. They are ideal for use for non-technical personnel and measurement results take less than one minute.

    By Spectro Scientific Distributor in Bangkok, THAILAND.

  • Noise and vibration pollution control for wind power industry

    As a major source of renewable energy, wind turbines are continuing to experience exponential growth, with a production capacity that is doubling every three years. Reliability and the optimisation of maintenance have become major economic challenges for wind turbine operators.

    By ACOEM Office in Bangkok, THAILAND.

  • Absolute separation for the energy sector

    Energy will have more influence in the future than in the past, not only in the economic field, but also in social and individual behaviours. VITONE ECO supports its customers in this important sector supplying with plants, which assure great efficiency and whose use fits into an idea of sustainable development. VITONE ECO offers solutions for the treatment of mineral oils and fuels from refineries and lagoons, dehydration of plants producing biogas, production processes of non-fossil fuels, such as biodiesel and bioethanol.

    By Vitone Eco S.r.l. Office in Bangkok, THAILAND.

  • Measurement solution for Biomass combustion research

    The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new fuels.

    By Protea Limited Distributor in Bangkok, THAILAND.

  • Measurement solution for AD-211 VOC speciation in natural gas, syngas & gasification

    Composition of Natural Gas, Syngas via VOC Speciation

    The composition of fuel gas is important in order to determine calorific value and also to detect any unwanted contaminants in the gas. Online analysis is important in order to give real-time and direct action on issues.

    By Protea Limited Distributor in Bangkok, THAILAND.

  • Fuel and Energy Future - Advanced Plasma Oxidation

    Fuels made from vegetable oil like Jatropha, Castor, Moringa, other plants and even algae and converting oil containing waste materials into fuel, are the future. World wide research and testing are going on to implement and produce so called bio fuels. EnvoPark Thailand has 2 products and applications which first reduce the costs and dangers of Bio fuel production as widely used today through esterification which is a highly toxic and flammable process compared to the PBS cracking process which does not require any chemicals at all.

    By EnvoPark Thailand Co.Ltd. based in Bangkok, THAILAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you