AirSource Technologies has provided services since 1990 to many industries. Below are a few examples.

Aluminum Industry: Performed a range of test measurements required by the promulgation of the Secondary Aluminum MACT standards. Testing included measurements of Hazardous Air Pollutants for establishing Area vs. Major Source Determinations, as well as dioxin/furan compounds associated with chlorine emissions from fluxing operations.

Cement Industry : Performed RCRA Trial Burn and Comprehensive Performance Test Programs for multiple kilns firing hazardous waste fuels.

Charcoal Production And Briquetting Industry: Provided technical direction and field-testing services. Led negotiations with EPA to develop test methodologies for this difficult sample matrix. Testing included VOCs, PM10, and priority pollutant gases.

Chemical Manufacturing Industry: Conducted Trial Burn testing and waste feed sampling of incinerators receiving gaseous, solid, and liquid waste streams.

Filter Manufacturing Industry: Testing included total particulate, PM10, total hydrocarbons, and speciation of potential Hazardous Air Pollutants (HAPs) by on-site extractive FTIR.

Hard Chrome Plating Industry: Conducted inlet/outlet testing of two wet scrubbers treating emissions from a battery of hard chrome plating circuits, employing Method 306 to optimize test precision for determining total chromium

Hazardous Waste Handling Industry: Conducted on-site GC speciation of VOC constituents by Method 18 collecting samples continuously around-the-clock in large vacuum canisters in order to demonstrate compliance control of a VOC recovery/afterburner installation

Lead Acid Battery Manufacturing: Provided compliance test services specifically targeting lead emissions for one of the largest automobile battery manufacturing facilities in the nation.

Lime Manufacturing Industry: Evaluated the effects of kiln/scrubber operating conditions on particulate and gaseous emissions. Used proprietary techniques to provide real-time particulate results. Integrated test data with process data to develop meaningful correlative information.

Limestone And Cement Production Industry: Conducted a facility-wide evaluation and NSPS performance test program of a major limestone and portland cement production facility.

Infectious Waste Industry: Provided annual testing for metals, particulate, HCl, dioxins/furans, and typical continuous emission monitoring constituents.

Motorcycle Manufacturing Industry: Conducted a VOC abatement system compliance demonstration

Utility Industry: Performed NOx testing for a newly constructed power generating facility at a Midwestern municipality.

Power Generation Industry: Conducted detailed measurements of volumetric flow, oxygen, and carbon dioxide levels in huge main ducts in the Economizer Outlet, Air Heater Inlet, and Exhaust Stack locations in order to evaluate overall plant and control system performance

Sewage Treatment Industry: Provided Incinerator Performance Testing Services and Relative Accuracy Testing of a Continuous Emission Monitoring system associated with sewage sludge incinerator.

Steel Industry: Conducted particulate testing and continuous emission monitoring of a rod mill exhaust stack. In addition, testing was performed to determine emissions associated with a slow cooling pen associated with ball mill production.

Also conducted an APC system flow study involving simultaneous flow traversing and data recording associated with a network of massive main ducts.

Stack Testing for Power Generation Plants - Energy - Utilities

Contact supplier