Condenser Evaporator Articles & Analysis
8 articles found
In latent heat storage, heat is used to induce a phase change in the storage material: solidification, evaporation, condensation, or sublimation. The energy required to produce these phenomena is very high, which make these systems much more compact than the equivalent storage systems based on sensible heat, and since a material does not change its temperature ...
Personally having spent some time in the Middle East in the 70’s, using “water coolers” – window units that circulated water across a rotary fan – seemed like a much more efficient way to cool ourselves down than the typical evaporator/condenser unit. HEAT AND BATTERIES So, we know excessive heat can cause damage to our bodies, but ...
For wet cake the recovery potential of thermal energy is 57%, for thin stillage 41%, for syrup 40% and for the evaporation condensate 2.5%. Specific issues for establishing AD of stillage fractions are evaluated in detail; these are high nitrogen concentrations, digestate treatment and trace element supply. ...
Some design parameters considered are compressor pressure ratio, compressor isentropic efficiency, gas turbine isentropic efficiency, gas turbine inlet temperature, HRSG pressure, pinch point temperature, absorption generator temperature, absorption evaporator temperature and absorption condenser temperature. The objective function considered for the optimisation ...
With the thermoeconomic analysis procedure, optimum working conditions such as condenser, evaporator, subcooling and superheating heat exchangers and temperatures are determined. ...
The assay results indicated that condensate and the BCTMP effluent, which are currently treated with the anaerobic internal circulation reactors, were the best streams for anaerobic treatment because of their relatively high degradability (>80%) and initial rates of biogas production. ...
The present investigation has been carried out for evaporator and condenser temperatures in the range of -38?C to 7?C and ...
In the spray tower, simultaneous heat and mass transfer take place between the brackish water and air, which results in the evaporation of the brackish water and humidification of the air. Fresh water is obtained from the humidified air by condensing the water vapour using a VCR system. Parametric studies were carried out to study the effect of various ...