firing system Articles
-
Fire systems engineering case study
General fire safety in England and Wales is delivered through compliance with the Regulatory Reform (Fire Safety) Order 2005. By virtue of this Order, the responsible person should carry out a fire risk assessment on their premises, implement appropriate fire precautionary and protection measures, and maintain a fire management plan. The main purpose of the order is to prevent fire, minimise risk ...
-
Fire-Fire Extinguishing Systems Installation - Turin (Italy) - Case Study
The AKHELEC team went to Turin to inspect the installation of 5 fire-fire extinguishing systems for electrical transformers – MX product range – on 5 concrete pits at a new underground substation. At this site, a metal containment bund was also installed on a neutral grounding ...
-
Containment Bund Installation - France - Case Study
The GMT team installed a containment bund (BAFX3) fitted with a filter system and level sensor at a large French nuclear facility. In order to fit the transformer with an active fire extinguishing system, GMT manufactured some resin beams containing FLAMAUTO, which were fitted on to the ...
-
Belledune - Case Study
In 2021, Interfor in Belledune, NB purchased a 1000 hp wood fired energy system from Nexus Combustion inc. The energy system is used to supply steam to their 6 lumber dry kilns, hot pond, and ...
-
Modular Containment Bund Installation - France - Case Study
At the end of May, the GMT team installed a modular containment bund (BAFX2) with 2 modules, a fire extinguisher and a filter system. The installation was performed at the site of a renowned French car manufacturer. This work was performed following an incident at the rear of the electrical substation that was damaged by fire. The installation was completed in only half a day: well ...
-
Utilisation of waste coal dust of steel industry for power generation
The present paper describes the generation of waste coal-dust from steel industry and its utilisation for generation of power in power plant. The main objective of the work is to utilise the heat energy of coal dust into useful work and propose a combination of coal and coal dust supplying system to the boiler. The work started with the collection and analysis of the coal dust. The physical ...
-
Bathurst - Case Study
In 2022, Interfor in Bathurst, NB purchased a 40 MMBtu wood fired thermal fluid energy system from Nexus Combustion inc. The energy system is used to supply 500 F thermal fluid to heat their 6 existing lumber dry ...
-
Solar Commercial RoofMounted Project - San Bernardino International Airport - Case Study
Roof-Mounted System installation using PhonoSolar’s 240W Mono Series (Standard Modules) Project Overview Location: San Bernardino, California, United States Project type: Roof-Mounted System Size: 632 kW Number of Modules: 2,688 Product: Phono Solar 240W Mono Completion Date: April 2011 Construction Period: 8 Months Estimated generating ...
-
Design of a Matched IR Emitter for a Portable propane fired TPV Power System
ABSTRACT: The design of an IR emitter is described for use with a small portable cylindrical ThermoPhotoVoltaic (TPV) generator. The IR emitter consists of a cylindrical array of 1 to 2 mm diameter ceramic rods. The spacing between these rods is chosen such that slits are formed between the rods with a slit width equal to about 1/10* of the rod diameter. Computational Fluid Dynamic (CFD) modeling ...
-
Case study: AMAPETCO onshore gas power generation
ProServe with its principles Dresser Rand has supplied, installed, commissioned and start up on Nov 2015 a very unique 2 X 780 kW gas gen sets using the flare gas at AMAPETCO company field in Ras Eldeb bay “100 Km south of Hurghada city on the red sea. These two gen sets are the first environmental friendly ones in Egypt using a catalytic convertor to reduce the NOx to less than 100 ppm. ...
-
Fire-Protection Decking Installation - Switzerland - Case Study
The GMT team installed a fire-protection decking (MX) covering 140 square metres at a research centre in Switzerland in only 10 days! The installation of the structure, grounding, fire suppression installation and grates were adapted to the existing situation. This was the largest installation ever completed! Congratulations to the whole team for successfully completing the ...
-
MX System Installation - Turin (Italy) - Case Study
At the end of November, our team of installers went to Poissy (France) to install an industrial substation for a long-standing ...
-
Exploring the Ceramic Fiber Paper in Incinerator
In the realm of advanced materials, ceramic fiber paper has emerged as a versatile and indispensable product, finding applications across a wide range of industries. Engineered from high-temperature alumina-silica fibers, this lightweight and flexible material boast exceptional thermal insulation properties. In this article, we delve into the characteristics, manufacturing process, and diverse ...
-
Do You Know The Costs Involved To Get A Tyre To Oil Plant?
Before investing in any kind of Tyre To Oil business, most business owners should understand the tyre pyrolysis plant cost involved. There is a selection of Tyre to Oil Plant suppliers around the globe, so the costs and prices vary based on the different plant types. Beston is really a supplier which offers one of the more reasonable costs in relation to Tyre To Oil plant projects. The Beston ...
-
BBA emergency pump units for a nuclear power plant
Following the Fukushima nuclear disaster in 2011, safety regulations at many nuclear plants have been considerably tightened, this has led to an increased demand for fire fighting pump systems. These systems must comply with extremely strict requirements and regulations. Working closely together with the Belgian distributor Rental Pumps, BBA Pumps has recently completed one of the most demanding ...
By BBA Pumps BV
-
Fire-Protection Decking Installation - Pamplona, Navarre (Spain) - Case Study
In April 2019, the AKHELEC team went to Pamplona in Navarre, Spain, to oversee the installation of 2 modular containment bunds – BAFX3 product range – fitted with our Filtrelec dielectric oil filter system on two 20 and 40 MVA power transformers. Our customer also installed a pair of BAF1 ...
-
Gas Fired Oven
INDUSTRIAL GAS FIRED OVEN CONSTRUCTION An industrial Gas Fired Oven is typically of steel construction, comprised of inner and outer shells of sheet steel panels, separated by 4” thick, 6 lb/ft3 density mineral wool insulation. The panels are constructed as to minimize metal-to-metal contact between inner and outer shells and reduce heat flow from oven chamber to the exterior surface. ...
-
Active prevention of fires caused by damaged batteries during alternative fuel production thanks to Lindner`s Fire Prevention System (FPS)
DI (FH) Thomas Huber & DI Stefan Scheiflinger-Ehrenwerth, MSc. Lindner-Recyclingtech GmbH, Product Management, Spittal an der Drau, Austria Ing. Andreas Säumel Mayer Recycling GmbH, Executive Management, St. Michael, Austria SUMMARY: One of the most pressing recent issues in the mechanical processing and conversion of waste into solid recovered fuels (SRF) is the high fire risk. ...
-
European Oil and Gas from Exploration to End User
Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...
-
Factors Affecting Biochar Production Equipment Price
Biochar production equipment plays a vital role in converting organic waste into biochar, a valuable carbon-rich material used in various industries. Understanding the factors that affect the price of such equipment is crucial for investors and businesses seeking to venture into biochar production. By delving into these factors, buyers can make informed decisions and select equipment that aligns ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you