geothermal loop Articles

  • Hydrogeological and environmental impact assessment of a geothermal closed loop ground source energy installation

    ESI in Milan was approached to give support for designing one of the largest closed loop systems for heating and cooling in Europe.  The system was installed at the IKEA store in Corsico, Milan, with the need to provide some 1.4 MWth and covering thermal energy demand in the range from 40 to 100%.  The closed loop system is expected to save the Client over 500 t/y in CO2 ...


    By ESI Consulting

  • GeoSmart bags multi-loop and pump handler

    GeoSmart Energy has acquired a time-saving multi-loop and pump handler designed for geothermal drilling. The GeoSmart Push'N Pull simplifies the installation of geothermal pipes in vertical drill applications, saving time, money and manual labour. "Geothermal drillers will appreciate its'push'factor for inserting pipe while water well drillers will love its 'pull' factor for extracting pumps ...

  • Geothermal Energy... Power from the Depths

    The Earth's crust is a bountiful source of energy—and fossil fuels are only part of the story. Heat or thermal energy is by far the more abundant resource. To put it in perspective, the thermal energy in the uppermost six miles of the Earth's crust amounts to 50,000 times the energy of all oil and gas resources in the world! The word 'geothermal' literally means 'Earth' plus 'heat.' ...

  • World geothermal power generation nearing eruption

    With fossil fuel prices escalating and countries searching for ways to reduce oil dependence and greenhouse gas emissions, capturing the earth’s heat for power generation is garnering new attention. First begun in Larderello, Italy, in 1904, electricity generation using geothermal energy is now taking place in 24 countries, 5 of which use it to produce 15 percent or more of their total ...


    By Earth Policy Institute

  • Talking Point: Geothermal systems and the value of maintenance programmes

    Mike Deed, Managing Director of Geoquip Water Solutions, is the author of Talking Point in the October issue of Groundwater Engineering. He focuses on the huge benefits of installing a geothermal system and the importance ...


    By Geoquip Water Solutions

  • World geothermal power generation nearing eruption

    With fossil fuel prices escalating and countries searching for ways to reduce oil dependence and greenhouse gas emissions, capturing the earth’s heat for power generation is garnering new attention. First begun in Larderello, Italy, in 1904, electricity generation using geothermal energy is now taking place in 24 countries, 5 of which use it to produce 15 percent or more of their total ...


    By Earth Policy Institute

  • A Cleaner Energy Future

    As renewable energy plays an increasingly important role in the world’s energy portfolio, the standards of ASTM International Committee E44 are helping to pave the way for innovation in clean energy sources. A growing population and improving living standards around the world are causing significant increases in energy demand and competition for fossil fuels. These escalating energy ...


    By ASTM International

  • Utilizing Waste Heat For Power

    Continuous duty gen-sets provide base-load power generation in diverse applications around the globe. However, high fuel costs and engine maintenance are pain points felt by operators. A low-maintenance path to significant fuel savings and lower emissions is what the U.S. Department of Defense (DOD) had in mind when they approached ElectraTherm to integrate the company’s Green Machine waste ...


    By ElectraTherm

  • Building New Industries and Creating New Jobs in a Plan B Economy

    Building a new economy, one that can sustain economic progress, involves phasing out old industries, restructuring existing ones, and creating new ones. This new economy will be powered by renewable sources of energy, will have a more diverse transport system--relying more on rail, buses, and bicycles, and less on cars--and will recycle everything. For example, coal use will be phased out, ...


    By Earth Policy Institute

  • Malvern Community Hospital, Worcestershire - case study

    ENER-G delivered a solution that combines two low carbon technologies – a ground source heat pump system and a combined heat and power (CHP) unit - as part of the eco-friendly design brief set by Interserve, which was contracted by Worcestershire Primary Care Trust to build the £17.7 million new hospital. The 24-bed hospital will utilise renewable geothermal energy for heating, ...


    By ENER-G

  • Heat Pumps – FAQs

    1. What is a Heat Pump? To put it simply; ground source heat pumps and geothermal heat pumps produce high grade heat from low grade heat which is found in the earth and our atmosphere.2. How does a Heat Pump Work?Heat pumps work in exactly the same way as air conditioners or refrigerators, but in reverse! Heat pumps capture latent energy which is stored in sources such as air, water and earth. ...


  • Case study - Green Machine uses biomass to put power back on the grid

    St. Helena Island, South Carolina Gross Power Output: up to 43kWe Thermal Heat Input: 200 - 500kWt Hot Water Input Range: 160 - 235°F Hot Water Flow: 150 GPM     Cold Water Input: 68°F Cold Water Flow: 150 GPM In fall 2010, American Capital Resources Company installed ElectraTherm’s heat-to-power Green Machine, for generating power from ...


    By ElectraTherm

  • Oceans of Energy

    Technologies that harness the energy of moving water or temperature differentials in the oceans promise to deliver abundant carbon-free electricity. Long before humans got hooked on fossil fuels, we learned how to harness the power of water to do work. Rivers ran mills that ground flour, sawed logs or spun looms that transformed fibers into textiles. Later generations realized that moving water ...


    By Ensia

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you