Power Conversion Testing Articles & Analysis
23 articles found
Client: ENEL/One Wind Status: Completed One Wind’s St. Lawrence and Fermeuse Wind Farms, located in Newfoundland & Labrador, provide a combined 54MW of green energy capacity to the province’s power grid, providing enough electricity to power about 14,000 homes collectively. Pennecon Technical Services (PTS) were contracted by ENEL in 2008 to provide start-up and ...
As a power consumption metering equipment, electricity meter belongs to the metering product, which is used for the metering and billing of electricity, and is the basis for the orderly development of power operation and management. As a metering product, electricity meters involve the livelihood of every household, and the accuracy and reliability of power metering are quite high, and the ...
Digitisation is more prevalent in every aspect of our lives. The enormous amounts of data generated by consumers and businesses is driving an exponential explosion in demand for cloud computing. According to Synergy Research Group, total spending on cloud services climbed to $178 billion in 2021, a 27% increase over the previous year, and higher demand is forecast for the foreseeable future. As ...
If you’ve been following my blog series, you may have noticed a common thread: data drives effective decision-making. Whether you are acting on sustainability, energy efficiency, electrical resilience, safety, or any other aspect of improving operations, data is the feedstock of analytics. And the analytic tools that convert data into actionable insights are getting smarter. In a previous ...
Abstract : Accuracy in the measurement of solar cell performance attains more and more economic significance additionally to its importance in technology development. Measurement of bare (without additional interconnectors on the bus bars) wafer based silicon solar cells directly in production with a high relative accuracy is important for cell sorting and a high absolute accuracy is necessary ...
XZBELEC Technology specialize in researching and designing optical instruments, including the IR power meter used to test the IR intensity and the UV power meter used to test the UV intensity, at the same time, these power meters can calculate the rejection rate. Especially apply in the test of automotive solar film, insulation film, insulation glass. UV-IR Power Meter FS2150 Sales kit LS122 IR ...
A new digital twin project led by floating wind developer Principle Power will use advanced wave behavior analysis to improve load calculations critical to long-term design efficiency, project partners told New Energy Update. Last month, U.S. group Principle Power announced it would lead a consortium of public and private groups to develop the world's first digital twin software for floating ...
XZBELEC Technology, as a national UV Energy Meter manufaturer,which provide many kinds of instruments used to test the UV energy emitted by UV curing lamp, has the LS120 used to test the traditional mercury lamp and the LS128 used to test UV LED.These two instruments can help you test energy, power, temperature and time at the same time, can display curve,expert data and print test report. The ...
XZBELEC Technology specialize in researching and designing optical instruments, including the IR power meter used to test the IR intensity and the UV power meter used to test the UV intensity, at the same time, these power meters can calculate the rejection rate. Especially apply in the test of automotive solar film, insulation film, insulation glass. UV-IR Power Meter FS2150 Sales kit Solar ...
2015 Winner: Engine Test Facility of the Year presented by Automotive Testing Technology Magazine. Read more... Having won the prestigious 2015 Engine Test Facility of the Year award, the Intertek facility is now recognized as among the highest-specification, commercially available facilities in Europe and quite possibly the world. For its portion of the facility build, Sierra CP designed and ...
We are happy to introduce a new goalpost mounting solution for installing redundant class 1 anemometers. This new boom, designed specifically for use with our 80m XHD TallTower, positions anemometer cups at exactly 80 m above ground level—2.5 m away from each other—and 1.99 m above the horizontal arm of the boom. This configuration complies with guidelines provided in Annex G of the ...
The remote location of hydropower stations is often a great challenge when major repair work is necessary. The refurbishment of a large generator in the Scottish Highlands shows how Sulzer finds cost-effective service solutions even in places miles from nowhere. Much of the UK hydroelectric capacity was built during the 1950s. These installations have performed extremely well, especially ...
Power grids are nowadays experiencing a transformation due to the introduction of distributed generation based on renewable sources. At difference with classical distributed generation, where local power sources mitigate anomalous user consumption peaks, renewable sources introduce in the grid intrinsically erratic power inputs. By introducing a simple schematic (but realistic) model for power ...
This paper describes a new approach to generation expansion planning (GEP) problem to optimise simultaneously multiple objectives such as cost and stability margin. It is formulated as a combinational optimisation problem in order to determine the type and capacity of the new generations as well as their timing and placement. This study presents a comprehensive model of hierarchical optimisation ...
Congratulations! You’ve made it through the first year of planning for compliance with the Major and Area Source Boiler MACT rules. That means there are two years left for major sources to come into compliance by January 31, 2016 (or January 31, 2017 for those who requested and received a one-year extension), and just shy of two months left for area sources to come into compliance by ...
This study presents a review on energy and exergy analysis of Otto and Diesel engines. Calculation methods of the analysis are discussed in detail. Previous studies, from 1963 to 2008, are chronologically listed and studied. The test engines had different cylinder numbers, speeds and rated powers. Engine specifications and test bench schematics are given in tables and figures. The best exergetic ...
A new three-phase four-wire DSTATCOM (distribution static compensator) is proposed for power quality improvement in the distribution system. The DSTATCOM is based on a star/hexagon transformer and three-leg VSC (voltage source converter). It compensates harmonic current, reactive power and balances the load along with neutral current compensation. Each of the three single phase transformers has ...
Characteristics of CF4 treatment process with a rotating arc are investigated under different thermal and non-thermal plasma conditions. To generate high temperature or non-thermal plasma conditions, a rotating arc reactor is operated with various operating conditions, which are species of carrier gases, flow rates, and input power. Test results reveal that that high temperature conditions caused ...
In this paper a novel pelletising process is described utilising one-axial compression. Compression tests of saw dust samples were conducted at different applied forces, moisture contents, process temperatures and hold up times using a compression cell powered by an Instron testing machine. Additionally the effect of heating in saturated and unsaturated atmosphere was studied. The densities of ...
Symmetrical components are of great importance in many applications in electrical power systems, such as power protection and condition monitoring. This paper presents a computer-based algorithm for online symmetrical components estimation. The proposed algorithm uses the samples of the phase variables (currents or voltages) to estimate the magnitude and phase angle of each phase phasor at each ...