pyrolysis gas Articles

  • Process for the Separation of Gas Products from Waste Tire Pyrolysis

    In recent years, pyrolysis has proven to be an effective thermochemical process for the recycling of waste tires. After pyrolysis, three fractions are obtained:  carbonaceous solids, liquid hydrocarbons, and the so-called noncondensable gases. In this paper, the starting point is the pyrolysis reactor outlet that provides a gas stream with a temperature of 600 ...


  • High density polyethylene (HDPE) pyrolysis plant

    Thermal degradation of plastic polymers is becoming an increasingly important method for the conversion of plastic materials into valuable chemicals and oil products. In this work, virgin high-density polyethylene (HDPE) was chosen as a material for pyrolysis. A simple pyrolysis reactor system has been used to pyrolyse virgin HDPE with an objective to optimize the liquid product yield at a ...

  • Resource treatment of HPF coking desulphurisation waste solution: composition and characteristics of pyrolysis

    HPF (H: hydroquinone; P: dinuclear cobalt-phthalocyanine sulfonate; F: ferrous sulphate) coking desulphurisation waste solution (CDWS) produced from coking oven gas desulphurisation process is an extremely harmful pollutant. The fundamental natures of this solution, which involves its main ingredient and content, type of organic matter, thermal decomposition characteristics of salt, and ...


    By Inderscience Publishers

  • Microturbines, Gas Engines Link Biogas to the Grid

    OPPORTUNITIES to produce electricity from methane are being improved continuously as manufacturers introduce new and upgraded equipment to address market needs and varying characteristics of raw biogas. In the renewable energy from organics recycling arena, the two primary types of electricity generation equipment are microturbines and reciprocating gas engines. This article provides a brief ...


    By BioCycle Magazine

  • Staged Thermal Treatment Combined With Pyrometallurgical Smelting Producing Energy and Products From Waste

    Incineration of waste is considered as a state-of-the-art technology. However staged gasification in combination with pyrometallurgical smelting is ready for market introduction and offers principal advantages. These are higher efficiency (up to 35% electricity), efficient and cheaper fuel gas cleaning (less emissions), high quality secondary products (synthetic basalt), high input flexibility, ...


  • Sustainable Biorefineries: An Important Research Topic

    In recent years, substantial steps into the transition towards a biobased economy have been taken in order to reduce the reliance on imported oil and the emission of greenhouse gases.  As far as Europe is concerned, Sweden, home to theEUBCE 2017 in Stockholm, has been very successful in decoupling GHG emissions from economic growth: from 2000 to 2012, ...

  • Biomass and Integration in Future Energy Systems and the Bioeconomy

    Biomass was the primary source of materials and energy until the industrial revolution set off a series of major changes around two hundred years ago. In the industrialized world fossil fuels became the primary source for energy in the forms of electricity and heat and provided almost all fuels for transport. However, biomass continued to maintain an important role in the economies in both ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you