screw compressor Articles
-
Sentry Unit MEVRU (Gas Drive) - Case Study #170505
Project Details Location: Appalachian Basin Flow Rate HP: 245 MSCFD Inlet Pressure : 0-4 Oz/in2 Discharge Pressure: 200 PSI Heating Value: 2450 BTU/SCF Engine: 5.7 V8 Aereon’s Jordan Technologies Sentry MeVRU is driven by a 5.7 V8 engine and utilizes a rotary screw compressor. The overall footprint and design of the unit allows the Sentry MeVRU to be a versatile, mobile (able ...
-
Duplex Mechanical VRU - Case Study #170502
Project Details Location: Appalachian Basin/Marcellus Flow Rate: 334 MSCFD/Unit @1800 RPM Inlet Pressure : 0 –4oz/in2 Discharge Pressure: 200 PSI Aereon’s Jordan Technologies Duplex MeVRU (electric drive) houses two (2) Rotary Screw Compressors and two (2) 125 HP electric motors in the same Class 1 Div1 enclosure. This solution was brought about to reduce building ...
-
Tiffin, Ohio Installations - Case Study
Mix three 25’ x 16’ x 18’ anoxic basins. SPECIAL REQUIREMENTS: TSS readings cannot exceed 10% variance from test stations located V from the top and V from the bottom. D.O. must not exceed .5 mg/L. PHI SOLUTION: Provide two bubble forming plates in each basin located in the tank pursuant to the CFD model and provide one 3-valve mixer controlled by an Allen-Bradley PLC. PHI ...
-
HITEMA CHILLER FOR RENTAL SERVICE
HITEMA offers a wide range of chillers for rent, ideal for a multitude of process cooling industrial applications. Extra Quiet and energy efficient, our chillers use high-performance and ozone-friendly refrigerant gases (R410A, R454B, R32). Each unit is electrically checked and performance tested before delivery. With a cooling capacity ranging from 1 kW to 1230 kW (and an heating capacity from ...
-
Energy efficiency: la Compagnie des Fromages counts on innovation with Emerson technologies
The subsidiary of the Bongrain Group is pursuing a policy to reduce its energy usage and CO2 emissions by investing in a facility designed by Cofely Axima, a leader in industrial refrigeration and a subsidiary of GDF Suez. This solution stands out for its use of a process that heats and cools within a single cycle and its use of key components supplied by the Emerson Group – a Vilter ...
-
Making the right pump purchase decision for lube oil manufacturers
Lube oil manufacturing plants are being built or expanded around the world to cope with increasing demand – most of which originates in Asia. Perhaps not surprisingly, China is projected to win the top spot from the USA in lubricant consumption within 6-7 years. And in India, the third-largest market in the world, annual demand has recently topped 2 billion liters. In both countries, demand ...
By DESMI A/S
-
Oil refinery vapour gas case study
1.0 Evaluation of Refinery Gases Various refinery gases are generated in the process of oil refining. These vary, depending upon the type of crude oil being distilled, such as Reduced Crude distillation, or Naphtha cracker. For the purposes of this case study the description and range of refinery gases are those gases produced from refining Crude Oil and Reduced Crude only. Crude oil is the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you