9 products found
Agni Power & Electronics Pvt. Ltd Products
-
Lighting Systems
-
Agni - Solar Home Lighting Systems (SHLS)
The Solar Home Lighting System is an excellent solution for Domestic Lighting (DC) in rural/urban areas and especially in remote areas which are inaccessible by the power grid. A typical solar home lighting system comprises of Solar PV Module, Battery (LMLA/VRLA), Charge Controller connected in a sequence to provide power to domestic load (like luminaries, portable TV, radio, DC fan etc.) The battery and module ratings are selectable as per the load ...
-
Agni - Solar Street Lighting System (SSLS)
The Solar Street Lighting Systems caters to need-based street lighting and outdoor/garden lighting. It gives 10-12 hours of continuous, bright, cooler light, with automatic dusk to dawn controls. A typical SSLS comprises of a CFL/LED luminary light source, battery (LMLA/VRLA) for storage of electricity, PV module for charging the battery, charge controller for safe charging and discharging of battery and dusk-to-dawn controls for operating the lamp. The ...
-
Solar PCU
-
Agni - Solar Generator
All photovoltaic panels produce electricity in DC, because of this, an inverter is required for all solar power systems to make the electricity usable. Solar grid-tie inverter is used to provide AC power supply to electrical load, without interruption, and has the additional facility of exporting excess Solar Power to the power lines of the community's electricity ...
-
Agni - Solar Power Conditioning Unit (PCU)
SOLAR POWER CONDITIONING UNIT (PCU) A Solar PCU provides 230V AC, single phase or three phase 4-wire AC power supply to operate connected electrical load without any interruption. It consists of an inverter for converting DC power to AC power and a Charge Controller unit for charging the battery from Solar PV and Grid on a solar PV priority mode. The configuration and sizing of the PCU depends on the electrical load connected with the system. The product ...
-
Agni - Hybrid Solar Inverter (HSI)
The HSI is a uniquely featured solar inverter which provides single phase or three phase 230V AC power to connected load. It works with battery or without battery-connected conditions and also supports the connected grid, to cater to the load. Power generated from solar PV is fully utilized to either charge the battery or to cater to the load, in conjunction with the grid. This system also has the capability to run the load directly from solar PV, in ...
-
Agni - Grid Connected Solar Inverter (GCSI)
The GCSI is a solar inverter which provides single phase or three phase 230V AC power to connected load in presence of battery or both the battery and PV. Power generated from solar PV is fully utilized to either charge the battery or to cater to the load in conjunction with the grid. This inverter has the capability to export excess PV power to the grid, when battery is full or load is minimal and grid is present. In case of grid failure, it can support ...
-
Solar MPPT Charger
-
Agni - Maximum Power Point Tracking (MPPT) Based Battery Charger
The Maximum Power Point Tracking is a mechanism that can harvest maximum power from solar array. The tracking algorithm is fully automatic and does not need operator adjustment. Under most conditions, this MPPT will boost the charging current if the VMP is greater than the battery voltage. This MPPT charger has a 3-stage battery charging algorithm to charge the battery quickly with highest efficiency and ...
-
Balance of Systems (BOS)
-
Agni - Solar PV Junction Boxes
A photovoltaic junction box is an important device of a solar PV array. It is also referred to as PV Combiner Box or Array Junction Box. It collects DC power from several PV input strings to be connected in parallel with blocking diode, fuse and surge protection device on each PV input string before transferring the power to DCDB /PCU/Inverter. Enclosures of all junction boxes are made of FRP/polycarbonate material which is protected against dust, water, ...
-
Agni - Control Panel
CONTROL PANEL Specially designed for distribution of power (supply) into different subsidiary circuits with protections (fuse, circuit-breakers etc.).The control panel comprises of DC Distribution Box (DCDB) in PV/Battery side and AC Distribution Box (ACDB) in Load/Grid side, with suitable powder coated metal casing box as per IP21 standards, for indoor application. Circuit breakers/Switches/Connectors (IS 60947), panel lamps, energy meters are also ...